There are many situations in which you should urgently get a curtain or curtains. And there is no time and the desire to do something overhaft and expensive. For example, for temporary housing, such as a hostel or removable apartment, such curtains are needed, which then may have to redo the window of a completely different size.
Therefore, such a way of registration of the window can be quite useful. For him, you do not need a lot of fabric, and there are several different styles of fastenings that can be alternating. Choose the one that you like more, or change the view of the window once a few days - the design is universal!
№1 Alternative to the boring of the Roman Curtain without seams.
№2 Curtains without seams with two broots or clamps.
№3 curtains without seams with one thing in the middle.
Necessary materials:
- Meter of fabric suitable coloring. You can choose the material for more expensive in the decoration department, or do the cheap cotton cloth
- Meter of lining fabric (if necessary so that the curtains are tight enough)
- Textile adhesive (or thermolent)
- Scissors
- Roulette
- Iron
- The basis for the Roman curtains (for the first option)
- One or two decorative brooches for the second or third
The author of the master master has tried to work with a thermal gas that melted iron, and with special textile glue. You can choose the option that it seems more convenient for you.
1. Dimmerize the width of your window. Such a curtain, first of all, is designed for a narrow window. For wider outlook, several curtains need. After measurements, the canvas of the desired width with a viscost of 5 cm from each edge is cut. The width of the fabric should be at least 1 meter. In the textile store fabric, most likely will be wider.
2. Place the edges of the fabric from all sides and shifted that the folds of the folds are well fixed. If you use a melting thermolent, put it between the edges and the basis from the inside and go over the fabric with a hot iron. If you work with textile glue - just wake them edges and press them for a while.
3. If your choice fell on the Roman curtains, you need to do on the edges of the rods for rods. To do this, you should simply proceed the fabric in such a way that a narrow pockets formed on withdrawal, and copper its edges using the selected glue. Collect the entire design of the curtains can be used after complete drying of the glue. To the stem of the framework it was easier to turn into pockets, you need to remove the rubber tip on one side.
Curtains without seams with lining
1. Process the edges of the decorative tissue in the same way as described above. Put the item of the same size from the lining fabric and treat it in the same way. Align two outbreaks together on an ironing board or other working surface.
2.After this you need to connect the edges of two canvases and glue them with each other.
3. As the author's opinion of this master class, working with the adhesive thermal control is still more convenient ...
4. The ribbon is easy to fix around the perimeter, go through it with a hot iron, and then simply remove the paper base.
5. Such a procedure should be repeated with the rest of the edges. After that, the speed should be left cool.
6. And no needles or sewing machines!
7. Shuffle the cloth so that there are no folds and chances on it. Just try not to pass the iron at the edges. After that, fill the extreme rods of the Roman curtains into the appropriate pockets and secure the curtain on the window.
8. The length of the curtain can be before the windowsill or more. With the help of intermediate rods, you can change it.
9. Install the rods for the formation of folds at the desired distance from the edge so that the curtain takes place under them.
10. Pull the fabric from two sides above the top rod so that the fold is formed.
11. Now repeat the same with the second rod. It is possible that the folds are the same, you will have to adapt a little ...
Depending on the width of the folds, the window will be closed to a greater or lesser extent.
Curtains with a brook do it even easier.
The corter can be sewn with two rods, as in the first version. But it can be limited to only one top mount. Make sure the brooks or clips that you have chosen is strong enough and can withstand fabric. Alternatively, you can fix the edges of the fabric by pins. In this case, you can use any decor, including ordinary clips.
1. If you want to use this fastening method for the same curtains, which was originally sewn as Roman, just secure both edges (top and bottom) on the top of the window. The curtain will be twice as shorter.
2. Then just pick the edge of the curtains in one or several places and secure the pin or brook.
3. Brooks will allow fixing the formed folds. If you want to use two broots, the bottom rod is better to remove. Such folds look better on a thin canvas.
Form the folds of the desired form and fix them with broots or clamps.
And one more way to fastening ...
Here is such a way of fastening the curtains with the knitting needles, one of the directories. The upper part is simply attached at a different distance from the top edge of the window.
It turns out from one meter of the fabric, and several meters adhesive thermolent can turn out such a universal curtain!
A source