7 useful alternative methods of applying Scotch

Anonim

Pictures on request 7 useful alternative methods of applying Scotch

1. Get rid of pet wool on your clothes

If you have pets, you probably know such a problem - to clean the wool clothes. Usually, for this purpose they buy a special sticky roller or simply spend the wet hand over clothes, and the second way is not too effective, and the roller may not be near. In this case, you can use Scotch: You can see a little tape from the roll, put the adhesive side to the clothes and drag sharply - all the hairs-of-clothes will turn out to be on Cottle. By the way, in the same way you can save your favorite sweater from rolling, without damaging the fabric.

2. Get the city

If the zanose sits not too deeply, then you can use the scotch to extract it. It is necessary to glue the tape to the damaged area of ​​the skin and drag sharply in the same direction, in which it was covered. Just pay attention to what everything needs to do quickly, without taking attempts to pull off the off -landic gradually, otherwise there is a risk that it will break, and part of it will remain in the skin. If you do everything correctly, then the zanoz will come out quite easily. The undoubted advantage of this method before the traditional smelling with the help of a needle is that you will not leave additional damage on the skin and do not make the rink deeper.

3. Stop bleeding

If you got a shameless, but painful wound, and blood does not want to stop, then thoroughly rinse the damaged place, get the edges of the wounds together and stick to this place tape - the blood will quickly stop. However, when you still get to the first aid kit, then process the wound with iodine or green.

In the same way, you can use tape to prevent the appearance of corns. If you feel that the shoes are unbearable to the leg, and there is no leucoplasty, stick to this place tape: the skin will not directly contact with shoes, and hence it will immediately become easier.

4. Conside the tips of the shoelaces

Over time, the tips of even the highest quality laces come into disrepair and put on their boots in the holes becomes very problematic. If you wrap the finished tips with a stationery tape, then they will look almost like new ones, and it will be easy to hide them in the holes.

5. Make a non-standard sculpture from Scotch

Nowadays, artists often apply tape for this purpose. Some, for example, the famous Mark Jenis, make human figures in full size from Scotch. To do this, it is put on a person with tight clothing, which is not sorry to spoil, and then wind the fine food film are turned on, so that the tape does not stick directly to clothing and glued on top of the tape. Artists are recommended to pre-cut the tape with small strips of 15-20 cm long and gradually stick them on the body "model" in several layers. When the sculpture is ready, the tight strata of the tape is neatly cut off from the body "model", and then again connected in the section of the section with the help of all the same tape or resistant glue. Of course, you can wrap any item in a similar way.

6. Make a manicure

To do this, take the tape of the middle sticky and nail polish. To begin with, check how well the scotch holds on the nail - it is important that it is easily dug. If everything is in order, then you can proceed directly to the manufacture of nails. First, paint your nails with varnish in one layer and wait until it dry completely. Then cut the tape with different figures - squares, triangles, abstractions. It is desirable that the figures have more sharp corners. Then turn the tape to the nails, cover it with a varnish of another color and carefully remove the extra tape with tweezers. The result will be abstract patterns on the nails - in those places where you glued to the nails of Scotch, and then removed it, the varnish will be visible to which you originally covered your nails.

7. Make a matte glass transparent

If you stick tape to matte glass, then it can be seen through it almost as good as through transparent. The fact is that the light, falling onto the surface of the matte glass, dissipates, and the adhesive layer on the tape fills the irregularities in the matte glass, and as a result, the rays of light are much easier to pass through it.

Similar image

A source

Read more