Justifying fashion to fit the cast-iron beds from sewing machines Singer under the modern interior, I ran into the need to create additional furniture made in a similar style. The storage system in the form of a shelf seemed to me the best solution.
Making the shelf I decided from what I can buy in a network building store, therefore components are simple and affordable (steel pipes 1/2 inches and fittings for them, as well as furniture shields of coniferous rocks 18 mm thick). From the tools we need to drink wood or jigsaw, drill and milling. You can do and fewer technical means, but the pleasure of work is distinguished for a longer period. So proceed. I did not draw the project, because Drawing it in the Skketchap type editor will take longer than the manufacturer.
The size of the shelves I decided to make 400 per 500 mm. It was a purely empirical calculation with binding to the width of a computer table in 500 mm
We take a feather drill on 22 mm and make four holes. The centers of the holes are at a distance of 40 and 80 mm from the edge. Data figures of deep meaning do not have, because I took them from the inner sensation of the correctness of this location.
Here's what we get in the end
Next. I am not a fan of sharp corners, and children are also friends with them too much. Therefore, as in a mental hospital, the form of furniture should be safe. Curl corners. To do this, I made a pattern from plywood with a rounding radius of 40 mm).
We assign a template to the future shelf and draw a rounding. Superior scolding a saw (pubsy)
Now milling (milling the tool is extremely useful, but if you wish, it is possible to do with a jigsaw, a file and a skin) for milling on the template we need a straight milling mill with a bearing
Freserver
Shlifuem.
About soft and safe forms wrote. Remove the chamfer with a radius with a bearing
Here's what we get in the end
Next, the shelves are whisch and coated with wax oil. I need a wenge color furniture, which means we take the oil-wax colors wenge. Why not melon and varnishes. Because the curves are hands. Oil wax gives a guaranteed and good result. They smeared with a brush, waited 5-10 minutes, erased with a cloth. It dried and we have a pleasant even tone without stains and a tree protected from an external environment.
Now on racks. These are 1/2 inches pipes. I took the finished with a carving of ferrous metal. Twelve tubes with a length of 300 mm and four long 200 mm. Tubes speckled. I used grinders
Here is a pipe galvanized, because There were no 12 tubes from the black metal.
That's what we get at the exit
Here we see also nuts. Conventional cast iron nuts
One edge will have to be processed
Additionally, we will need couplings. You can take black. But I wanted brass
Polish them with paste goya
And screw on the tube
The pipes themselves painted in a brown paint for metal with a hammer effect
The first two shelves
Below you can see the legs. They are made of adapters from 1/2 by 3/4 inches. Then I added to them also the plugs on 3/4 on which the felt mugs stuck so as not to scratch the floor.
On the upper shelf there are stoves from brass traffic jams. They were also polished with goya paste.
Well, the end result
I just share with you the idea and its possible performance. If you purchase all materials in a network store, the cost will be released about 4 thousand rubles. You can save if the pipe cut yourself and cut the threads as well. Brass clutches can be replaced with ordinary. If I did the project now, then instead of furniture shields used Panelo 15 or 20 mm. It is more durable and then the shelf can be used as a ladder. But the weight would then turn out more. This shelf weighs 16.5 kg.
A source