Happy owners of metal dryers for linen will soon be disappointed in their choice. The dryer, which is quite recently compact and easily collapsible, with time it becomes a burden of constant folding and folding.
Undoubtedly, it is better than constantly stretched laces in the middle of the room, but on the other hand, you can use even more compact, wall dryer, about the manufacture of which will be discussed.
The advantage of the wall dryer for linen is that it is easily going, it does not need to be constantly hiding and it takes little space. And the most important advantage is that it is easy to make it with your own hands.
For the manufacture of wall dryer for linen we will need
- Board 600x320x20mm
- Ladder bales 40x40x900
- steel corner 50x50 Long 40mm
- Bolts, nuts M10 and washers for them
Manufacturing process
As linen holders, we will use balusters for stairs that are sold in the construction market. Balaasins are chosen in shape so that the average part is without any reliefs. One edge, where the round cross section goes into a square, cut off, and inocress the second edge.
The second edge, with a square cross section will serve as a hinge. To do this, retreating from the edge of 20 mm., In the center, drills the hole D-10mm. For a bolt (hairpins), and all this farm will stay between two corners.
If the wall is concrete, then you can do without a board, and attach corners directly on the wall. If the wall is made of plasterboard, then the holders must be installed on the substrate (board).
To, holders did not hang out, but easily rotated, when assembling, between each holder (balusino), it is necessary to put the washer.
The final stage will be the finish finish of the holders. You can paint or operate with varnish, just do not forget, holders, carefully handle shallow sandpaper.