Recently, shortened versions of magnificent skirts from fatenies have become very popular in casual clothes, especially among young people. Similar models of different figures are called Schopin skirts.
Such skirts look gently, air and elegantly. They are often found in the festive and wedding fashion. Ballerinas are located in such skirts, so they are sometimes called skirts - ballerns.
Summer Schopin skirts are worn with jerseys, tops and t-shirts,
In the cold season - with dense tights, sweatshirts, turtlenecks and blouses. And if you combine a skirt with a silk top, elegant sandals or shoes, it will be an evening option.
Fabric consumption
Now there are various types of fate, but it is best for Schopin skirts a gentle and soft europhatin suitable for skirt. It can be ordered in online stores, it is not expensive and width of it 3 m, which greatly simplifies the process of cutting, because the consumption of tissue is large enough for such skirt.
I have 5 meters of Eurofatine with a length of 55 cm on the Schopin Schopin, 3 m. It turned out 8 layers of the Sun skirt.
I sewed a lining skirt with a lining, although 8 layers of the fireday no longer shine. But the lining will not give fire to clinging for tights in the cold season.
You can sew a Schopin Skopenka from half-fastened, the flow consumption in this case will decrease, but also the puff of the skirt too. So that the skirt becomes more lush, you just need to make it with a waist assembly, increasing the radius on the waist twice.
You can reduce the number of layers up to 5, but in this case there is already a lining accurately in the tone of the fate, because 5 layers of the fate will be shifted.
You can make all the layers of the fate of the fate in one pattern, then the skirt will lie with more smooth faldami, because the layers will lie on each other as one item.
I also wanted a more magnificent skirt, so the bottom layers I got out without assembling on the waist, and the upper layers - with the assembly on the waist. So layers will lie each separately and the skirt will become more lush at the bottom. For the assembly, I increased the radius on the waist twice.
How to sew a Schopin skirt
STEP 1
The three-meter cut, I folded twice along, it turned out 4 layers of tissue with two bends on one side and with one fold and two cuts on the other side.
With such a layout, the pattern falls more economically, but it turns out that the four midunits will be integer, and four of the sun will be with seams. That's just layers with seams we hide under solid details. We will make them without assembling on the waist.
Step 2.
Start one seam on the lower parts of the skirt, cutting it up to 5 mm and fed one way.
The second seam on the details are not completely stuck, leaving the connector under zipper with a length of 18 cm.
Step 3.
Fold together 4 upper parts of the sun, pave the planting line to a wide stitch and pull the lines before the waist girth.
Step 4.
Fold together 4 lower skirt details, combine seams. To be stuck and stagge on the waist. Also sew together 4 layers of lightning spaces.
Step 5.
Slow-up sutures under zipper, irrigate them.
Browse a lightning on the allowance.
Remove the lightning space. Disseminate lightning and turn it on at the same time in 4 layers of fabric.
Step 6.
The edges of the cut to turn over the zipper and pinch. Then hem them manually to the lightning by the secret stitch threads in the tone.
View from the wrong side.
Step 7.
The lining to the tone is cutting in the form of a half for saving fabric.
Half radius = waist grumps / 3
Step 8.
Start the seam lining, leaving the zipper connector, wash the allowance and trust. I have a mesh knitwear as a lining, so the sections do not appear. I do not cultivate them.
Step 9.
Connect the lining with the skirt of the exhaust to the wrongness, to fit and stack them on the waist.
The lining of the pitch around the zipper by 5 mm from the teeth and to strip the secret stitch to the zipper.
Treatment of upper cutting skirt
The top of the skirt can be treated in different ways. You can sew a belt, you can edit the upper cut of the reps ribbon in color (this is the easiest option, besides, the re-ribbon decoration is now found in all fashion collections).
If you do all the layers with a waist assembly, you can do without lightning, and at the top of the skirt instead of the belt to sew a wide decorative gum in the tone.
I do not have a fate at all, and the lining in the tone of the skirt, so I processed the upper slice of the Schopin skirt lining.
To do this, cut the strip of the lining width of 10 cm and start it along in half.
The belt sew two cuts together to the upper cut of the skirt. To the left of the lightning leave the tail 1 cm, right - 3 cm.
Shoot the belt top.
Fold the belt along in half the front sides to each other and stack ends.
Remove the belt ends, clagging a belt bend with an inside of a skirt over the suture of the appaching.
Sold the bend belt with an inside of a skirt manually or a typewriter.
Sew hook or button. Long tip of the belt hides under the short one!
It remains to level the bottom skirt. If the fabric lining, then you need to give a skirt to take no less than a day, and then align the floor lining. Sun down lining.
The fatin is lightweight, it stretches a little, so he practically does not immediately dispers. It is enough to simply firm so that all the skirt layers are at the same level.
Our Schopin skirt is ready!
From the wrong side, it is as neat, as with the front side.
a source