Ngifuna ukuhlanganyela nawe ukuthi ngenze kanjani i-chandelier ekhishini lami.
Ingamela elincane. Ngesikhathi sokuthuthela efulethini elisha, "ngiphule enye yama-chandeliers. Kwakuyi-flaf ngesimo sebhola. Umlenze, kunjalo, akazange aphonse futhi ngomcabango "epulazini uzosebenzisa yonke into" ejwayelene necala :)
Lapha, empeleni yena:
Leli cala beza, sasidinga i-chandelier ekhishini. Ezitolo, akukho lutho oluthande ngokufanele futhi lapha ngingena ezandleni zami lapha "isimangaliso" esinjalo :) (banikeze okuthile ukwenza okuthile).
Ukubuka Ngaphakathi:
Angazi ukuthi ngiyibize kanjani buhlungu, kepha le nto yalengiswa ngaphambi kwesibani efektri noma okuthile okunjalo.
Futhi-ke ngavakashelwa ngumcabango, xhuma umlenze wami ngalesi sibani, ukuze i-chandelier iphume. Sika isibani zonke izintambo ezingadingekile futhi ususe ama-fasteners.
Babedelwe ngokuphelele kangangokuba nganquma kulokhu futhi "umdanso" :)
Ukusuka ngaphakathi emlenzeni ngama-latches anamathela kwiplaffon uqobo.
Njengoba ikhishi lethu lisesikini sombala ophuzi ophuzi ngegolide ukufakwa, khona-ke i-chandelier yenziwa ngethoni ekhishini.
Ngakho-ke, qhubeka.
Ukuze silungiselele umhlobiso wama-chandeliers, sizodinga:
1. Iphepha le-emery (ngangingasebenzisi i-coarse kakhulu).
2. I-primer kupende wakudala (lokhu uma kufisa, kuzokoma amahora angama-24 uma kunesifiso - ungafaka isicelo, ngaphandle kwawo kugcinwe kahle). Izithombe zivele nje zinentshisekelo ethile:
3. Isiponji esivame kakhulu sokubala ubuso be-chandelier.
4. Peant (nginopende kaMatte, owayesetshenziselwa izindonga lapho elungisa ikhishi).
5. Clay Wallpaper (Endabeni yami). Ngayisebenzisa, kusukela manje sesinayo ngokweqile. Ungasebenzisa i-PVA glue noma okunye, kufanelekile ukugcwala indwangu yensimbi.
6. Isitsha se-glue.
7. Glue, ngezinto zokuhlobisa ezinamakhandlela (engizikhethile, ekuqaleni White, ngemuva kokomiswa kuba sobala).
Esibonelweni sesithombe se-glue yangemuva kanye naleyo engiyifakele umhlobiso:
Okokuhlobisa sizodinga:
1. Indwangu emhlophe (nginekotini, ungasebenzisa enye).
2. I-Ribbon Metallized.
3. Amaqabunga okufakelwa.
4. Ama-ladybugs ngokhuni (mine ku-velcro).
5. Polobuselin (nginobubanzi be-6mm).
6. Izimbali zokufakelwa (kulokhu, i-calla evela kwaTatex).
7. Izimbali zezimbali.
Ukuqala ukusebenza.
Okokuqala, kudingeka sihlanze ingaphezulu lesibani nge-sandpaper.
Okulandelayo, ukumboza nge-Primer ngopende wakudala (futhi, ngokuzithandela).
Ngemuva kokomiswa okuphelele kwe-primer (amahora angama-24), ungaqhubeka nokufaka isibani sethu ngendwangu. Ngaba nomqondo wokwenza ama-folds endwangu.
Sihlukanisa i-glue ngendlela efiselekayo (benginakho cishe ama-600 ml we-glue ehlanjululwe) futhi siyazibuza indwangu kuyo. Indwangu yokusika kangcono kwi-patchwork, kulula kakhulu ukwakha amafolda.
Okulandelayo, beka indwangu esibani:
Leyo ngxenye yendwangu ehlala imahhala, ukugoqa ngaphakathi, ngoba sinamathisela lonke isibani nangaphandle, nangaphakathi.
Ngemuva kokugcwala, lesi sithombe siyatholakala:
I-Air Bubbles Drive Hand, bushelelezi ingaphezulu.
Okulandelayo, ukubeka ukoma. Ungakhona lapha ngale ndlela (ngibeka isibani ku-foam ekhuphukayo).
Futhi ungasheshisa inqubo bese ukomisa ngeke kuthathe isikhathi esingaphezu kwehora eli-1 :)
Sibeka isibani sethu kuhhavini, ku-grille. Angikweluleki i-bastard, ngaphandle kwalokho ngeke yome kusuka ngaphakathi.
Shisisa kuhhavini ube ngama-70-80 degrees bese ugcine isibani cishe imizuzu eyi-10 lapho, bese ucisha kuhhavini, siyavula bese silindela eminye imizuzu eyi-10. Nginezindlela ezi-10. Nginezindlela ezi-3 eziphelele.
Ngemuva kokumiswa, isibani sibukeka kanjena:
Ngenkathi kungeke kukhange :)
Enqubweni yokunamathisela indwangu, umgodi ongenhla, lapho umlenze ufakwe khona, uvaliwe, ngakho-ke kudinga ukusika:
Konke sekumi ngomumo esigabeni esilandelayo - Umbala.
Ungakhohlwa ukumboza itafula ukuze ungabi nokungcola.
Futhi siqala ngesiponji, sihudula ukunyakaza ukuze sisebenzise upende kuwo wonke umhlaba (kusuka ngaphakathi).
Isibani esidwetshwe ngokugcwele:
Lowo pende, engiwusebenzise, owomisa ihora eli-1. Ngemuva kokumisa ungqimba wokuqala, amboze isibani ngolunye ungqimba, ngoba Kwezinye izindawo, iminonjana yokugqwala isayenziwa. Silinde ukomiswa okuphelele.
Ungakhohlwa ukupenda ingxenye engezansi yomlenze ibe ngombala ofanayo ukuze ingaveli esithombeni sonke.
Ngemuva kokuthi upende omisiwe, sixhuma umlenze ngesibani.
Sishiye ukungeza umhlobiso :)
Ngabeka konke ukwakheka ngakolunye uhlangothi, wena, ngokuzithandela, kungabeka umhlobiso ngendlela othanda ngayo.
Okokuqala, glue amaqabunga:
Ngemuva kwalokho sinamathisela ama-stamens. Ukuze lokhu sizigoqa kabili. Ngisebenzise imicu engu-2 ephuzi futhi eluhlaza:
Ke izimbali.
Ngaphambi kokuthi kugxishwe - kunqunywe umlenze, kusale u-3-4mm kusuka kwizimbali bese uyigoba ku- "Emuva":
Ukunamathelisa akuzisoli.
Manje engeza ama-ladybugs. Ngathatha i-velcro kubo futhi ngagcotshwa kwi-glue efanayo:
Sihlobisa izimbambo (sinamathela ngaphansi kwamaqabunga):
Ibha yokugcina - ama-semi-graysins. Bathatha kancane, ukuze bangalayishi ngokweqile isithombe esivamile. Ngibambelele ama-9pcs (ama-3pcs ezindaweni ezintathu):
Umphumela wokugcina:
Ihlala iyilengise endaweni.
Yilokho kuphela, ngithemba ngempela ukuthi inguqulo yami ye-chandelier ilusizo kothile!
Umthombo