Kukho izinto ezisebenzayo, zintle, kwaye kukho ezo zibangela imvakalelo yomona kwabanye.
Ibhegi yesandla kule nqanaba Master, mhlawumbi ibhekisa kudidi lwesithathu.
Ewe kona, yonke imihla awuyeki eofisini, kodwa ngokungathandabuzekiyo, le nkqubo ilungileyo iya kutsala izimvo zabanye.
Ukuze senze ibhegi yesandla, kufuneka:
-Ibhokisi ye-petals ye-rose ye-rose (inokufumaneka kwiivenkile zomsebenzi we-neading okanye iiSalons zomtshato);
- ilaphu lokunxiba;
-Isiqwenga soboya ovuthuzayo;
-Isiqwenga seplastiki esincinci (Plexiglass);
-ikhonkco lesiphatho se-hand
-ukutshixwa kwemagneti;
-I-D-rings;
I-COSP ezimbini;
-ukrokreyitha kunye ne-silk tape;
-Imilenze yengxowa.
Izixhobo:
-Inaliti ye-hard yolusu / ngoboya;
- umdlalo oqhelekileyo omncinci;
-Imisonto;
umgca:
Izikhonkwane;
-ukusika;
- isikere;
-I-Mini Drill.
Inyathelo loku-1.
Ukusuka kwiphepha leplastiki elicekeceke lisika izithuba ezintathu. Zimbini iinxalenye zecala lezandla, i-30 * 8 * 8, inye esezantsi 20 * 8.
Inyathelo 2.
Ukusuka kwilaphu elibandayo lokusika isiqwenga sendwangu 70 * 22 cm. Kwaye iziqwenga ezibini ze-Eadewalls 31 * 9 (ubukhulu bunikwe, kuthathelwa ingqalelo izibonelelo zeSeams). Ukusuka kwilaphu le-leng, nqumamela ngqo amaqhekeza afanayo.
Inyathelo 3.
Ukwenza kube lula ukuhambahamba, kufuneka ukhawulezise ezantsi kwengxowa. Kule, sithatha isigqibo malunga ne-31 cm (ukuphakama kwemveliso (1 cm kwicala ngalinye ukuya kwisibonelelo ngasinye). Senza imigca emibini efanayo ngesandla.
Inyathelo 4.
Sibeka ii-petals njengoko kubonisiwe kwifoto, zilungiselele ngezikhonkwane.
Inyathelo 5.
Sikhanyisa ii-petals ngomsonto ebomvu.
Inyathelo 6.
Ngokufanayo, senzana neminye imiqolo ye-petals. Kuyimfuneko ukubabakhaliba ngendlela yokuba umqolo ngamnye olandelayo uvala i-thunge yangaphambili.
Inyathelo 7.
Ngoku kufuneka ubambe imilenze kwibhegi yesandla. Ukwenza oku, senza imingxunya kwisiqwenga seplastiki esincinci, esasinqunyulwa kwangaphambili, emva koko sibeka iplastiki ngaphakathi kwingxowa yengxowa, kunye ne-tishu, ukuba bafumane kwimingxunya kwiplastiki.
Inyathelo 8.
Siqhubela phambili kakhulu- fubuka kakhulu kwibhegi yesandla. Ukwenza oku, thatha uboya, sibeka ibhegi yesandla kumsebenzi kunye nobutyebi.
Inyathelo 8.
Ngoncedo lwepensile kunye nomlawuli, ulinganise iqhekeza elifunayo.
Inyathelo 10.
Sika isiqwenga soboya kunye nesikithi.
Inyathelo 11.
Kunzima ukusebenza noboya, ukuze angaphuli kwi-villi, imiphetho ye-Odrice kungcono ukubambisa iteyiphu yokuqalisa, iboniswe kwifoto. Ukongeza, iya kuqhuba umsebenzi wokuthunga i-bagi yengxowa iye kweyona iphambili.
Inyathelo 12.
Ilaphu le-livelive linic, ikhuselekile kwangaphambili inkonshini yemagnethi.
Inyathelo le-13.
Senza ilog yentambo yekhonkco. Ukwenza oku, ukusika iziqwenga ezibini ze-6 * 2 cm, ukuqeqesha, sizonga esiziqingatha, sinamathela i-D-ring ukusuka phezulu.
Inyathelo 14.
Thumela i-hinges kwibhegi yesandla.
Inyathelo 15.
Thumela ukuvalwa kwesandla esiphezulu kwinxalenye ephambili.
Inyathelo 16.
Ukusuka ngasentla, ukuze iplastiki iphazamise, sibeka izicubu ze-lillings kwaye idayisile kwizibambiso zeefolda.
Inyathelo 17.
Sibeka i-zipper zipper ngaphambili kwebhegi yesandla ngendlela yokuba idibane nayo iphezulu kwibhegi yesandla.
Inyathelo 18.
Ukufihla umkhondo womsebenzi owenziweyo, unokuthunga komnye umgca wee-petals.
Inyathelo 19.
Ihlala inamathisela i-chain. Wajonga ngononophelo, ungatsiba amakhonkco omxokelelwane we-satin ribbon.
Inyathelo 20.
Ekupheleni komxokelelwane kwicala ngalinye, faka i-COSOS, intsalela yeRibbon Ribbon.
Ibhegi enomtsalane ilungele!
Umthombo