Behla iihadi, olukiweyo kwindlela yendlela yesiqhelo kunye netswayo yeKrisimesi yeKrisimesi kunye nesitena, zisiseko esihle kakhulu se-Invent. Kule klasi le matri, siya kuthetha malunga neyona nto ibuhlungu kubuhlungu. Izikimu eziboniswe kwifoto ziya kuyenza inyathelo lokwenyani lifikeleleke kwanokuba ngabaqalayo. Njenge-baylay yedlelo leglasi yobugcisa, sasiqhubela i-Rhombu sds kwimisebenzi ye-Peyote. Sibonisa iindlela ezintathu zokukhetha iihempe zokucheba ezivela kubuchwephesha kule ndlela.
- Ubugcisa beglasi yeglasi enemilinganiselo malunga ne-3.8 cm
- I-2 yeBiels Beads
- I-2 zahlulelo
- I-clap
- I-2 intshi (i-5 cm) ye-18- okanye i-20th caliber
- I-pin 22 caliber 6.4 cm ubude
- Intambo ehamba
- I-nylon cord (inketho)
- I-Beadas inaliti №12
- Iipliers
- I-KRuglogs
- Kuusa
- Intamo a, b okanye i-intshi ezili-41 cm)
- I-Cylindrical Beads Preciosa Preciasa
- I-1G Bead Faka umbala kwi-15/0
Imiyalelo yenyathelo lenyathelo lokuluka i-bead hard
Isiseko
Kwicandelo lentambo kunye nobude be-2.7 m. Shiya umsila we-30 cm ubude kwaye uthathe iibhlukhwe ezimbini zeCylindrical. Yenza ubuhlalu obutsha. Dibanisa kwi-ring, idayisile i-bead yokuqala ephantsi, kwaye emva koko ibuyele kwi-Bead yokugqibela.
Intamo A.
1. Yenza uNdebele ulukho ngokulandelayo:
Imigca 2-5: I-Cylindrical Colors Buds B
Umqolo we-6: I-Cylindrical Dolos Buds A
I-7th-13th: I-Cylindrical Doloyi Bors C
I-14th: B
I-15th: A
16th: ngaphakathi
I-17th-23rd: c
I-24: A
I-25th- 29 ye-29: b
I-30th: A.
Xa ugqibile umqolo, i-zigzag ye-zigzag ibuyela kwi-Beads ukuba ixelise izitepsi ezivela kwiibhlos (ifoto a). Iya kuba ngumgca wokuqala wesitena sakho sezitena.
I-ROWS 31-34: Ininzi yezitena ze-Brick (ifoto b) Sebenzisa iibhloko zombala A.
Imiqolo 35-39: Yenza umqolo wokugqibela womgca wezitena, ngokungathi luluhlu lokuqala lwezitepsi. Imigca emihlanu emihlanu ngemithi yeKrisimesi yeKrisimesi B.
2. Phinda imiqolo ye-6-39 kasixhenxe. Emva koko phinda imiqolo ye-6-30.
3. Yiya kumacandelo: "Ukuzalisa Iivili" kunye "nokumiswa".
Intamo b.
1. Wamkelekile kwi-Ndeebele ngolu hlobo lulandelayo:
I-ROWs 2-31: I-Cylindrical Dolos Buds A
32-48: Imibala yeBlows B
49-68: A.
I-69-85: B.
I-86-120: A.
Iya kuba ngumjelo ophakathi. Vut isiqingatha sesibini sohlelo lokulandelelana kwakhona kwemiqolo. Peel i-zigzag ngomgca wokugqibela ukuxelisa isiseko sezinyuko.
2. Yiya kumacandelo: "Ukuzalisa IiHesgies", "umhombiso wesikwere" kunye "nokumiswa".
Intamo c.
1. Wamkelekile kwi-Ndeebele ngolu hlobo lulandelayo:I-Rows 2-10: Imibala yeBeads a, umthi weKrisimesi.
I-11- Iibhlukhwe "
38-56: Umthi weKrisimesi we-Thubula usebenzisa i-Bisperin mbala v.
I-57-87: Umthi weKrisimesi oguqulweyo weKrisimesi usebenzisa umbala obhisperin A.
I-88-10: I-Tubimar Christia iKrisimesi I-B.
I-107-155: Umthi weKrisimesi oguqulweyo usebenzisa umbala A.
Yenza isiqingatha sesibini sentamo, isipili sibonisa okokuqala. Tshintshela kumthi weKrisimesi we-tublar malunga nemijikelezo yesithoba yokugqibela.
3. Beka umqolo wokugqibela ngokuxelisa izitepsi ezinamanzi.
4. Bona amacandelo athi: "Ukuzalisa iivili" kunye "nokuhonjiswa kwesikwere".
Ukugqibezela i-zhgututs
Ukuba i-harness yakho ithambile kakhulu, ukuze ingabi nakuko ukuba ibe ngaphantsi kobunzima bokumiswa, kutsiba intambo yenylon kwinkangeleko ye-harness ngaphambi kokugqiba imiphetho yayo.
1. Ukurhoxisa intambo kwizitepsi, thatha i-beerink a kwaye ubeke okulandelayo (ifoto c). Phinda le ndawo yesangqa kunye nenyathelo nge-bisericha yokuqala yokuqala.
2. I-Peesterly ityheli ityhubhu ejikelezileyo, ukhetha i-BIERInk enye kwaye ikhanya okulandelayo (ifoto d). Gqibezela umgca, ohamba phambili kwi-A.
3. I-Peeter nge-A. Peyote Rew's Roote's Roote's A. Emva koko thatha imiqolo emibini ye-15/10 icela umngeni.
4. Tsala i-Beads ezimbalwa ze-15/0 ukwenza ilogo yesiqingatha sesinye sefayili. Chitha intambo kabini ngomgca wokugqibela we-Beads 15/0 (Ifoto E) ukukhusela.
5. Khusela intambo usebenzisa iindawo kwaye usike.
6. Phinda amanyathelo 1-5 kwelinye icala lomgesi.
Isikwere se-ZHGGUA
1. Yemisonto ye-1.8 yee-M, ukulungiselela icandelo lesikwere sobubanzi be-13 ububanzi bemigca eli-13 kunye nobude bemigca eli-14. Umzobo 1. Phinda inkqubo yokwenza amacandelo amane.
2. Songa icandelo elijikeleze icandelo le-tublar lohlobo "umthi weKrisimesi" kwi-harness kwaye ufike esi siphelo zibini kunye (ifoto f). Kuya kufuneka uguqule inani lemiqolo ukuze usongele ngokupheleleyo imbambano.
3. Khusela imisila usebenzisa iindawo kwaye usike.
4. Jonga umfanekiso 2 ukwenza iziqwengana ezibini ngesikwere kwisikwere esisixhenxe ububanzi kunye ne-14 ubude. Zincamathise eziphelweni zeHures, njengakwimigangatho yesi-2 neye-3.
Ipendant
Ubugcisa bead
KwiPIN, khwela ibhedi yesilivere, umahlukana, usongamele iglasi yobugcisa, waphinda wabahlula-hlula kunye nebhedi yesilivere. Yenza ilogo eboshwe.
2. Sebenzisa ubungakanani bocingo lwe-18 okanye i-20, yenza unxantathu oneembombo ezijikelezileyo (ifoto g). Sika ucingo olongezelelweyo.
3. Beka ukunqunyanyiswa kwinxantathu kwaye uvale unxantathu (ifoto h).
IBale i-Dendants
1. Ukugxila kwimifanekiso 3 okanye i-4, ukuqaqamba isiqwengana senani elingaqhelekanga le-Beads kumqolo ngamnye.
2. Songa umphumo osisiphumo esijikeleze iziko le-harness kunye nomqolo wokugqibela ukuya eyokuqala (ifoto i). Ukukhusela umgca, tshintsha indlela yayo izihlandlo ezininzi.
3. Khusela imisila usebenzisa iindawo kwaye usike intambo.