Yadda ake yin tubalin ado ko dutse da hannuwanku

Adon bango zai kashe sau da yawa mai rahusa fiye da tare da tayal sayan.

Yadda ake yin tubalin polystyrene na ado polystyrene

Zaɓin mafi sauƙi shine ƙirƙirar fale-falen kayan ado don kwaikwayon bulo na tubali ko masonry, wanda ke buƙatar mafi ƙarancin kayan da kayan aikin. Kadaici kawai shine cewa saboda zaɓin zaɓi na Styrene ne, flarfin wuta, waɗannan flares ba a son yin amfani a wuraren zama.

Me kuke buƙata

• Polystyrene kumfa 20 mm lokacin farin ciki;
• Sharp wuka;
• matakin;
• fensir.

Yadda ake yi

1. Tantance girman fale-falen buraka. Standary tubalin farfajiya shine 250 × 65 mm, amma ba lallai ba ne a haɗa da shi: girma na iya zama sabani.
2. Yin amfani da matakin da fensir, yi hannu a kan masu girma dabam na fale-falen buraka akan takardar epps.
3. Yanke kayan tare da wuka mai kaifi don guda guda tare da layin. Kuna iya yin wannan kamar yadda cikin sharuddan matakin (idan kuna buƙatar samun cikakkun gefuna), kawai daga hannu (idan kuna son ƙarin dabi'a).
4. Yanke abinci a cikin kauri kamar kowane ɗayan kowane ɗayan kowane ɗayan kowane ɗayan kowane ɗayan ɗayan fale-falen buraka biyu. Foam na polystyrene yana da matuƙar haske, don haka ya dace don amfani da wuka tare da wuka kuma yanke ta guda a raga da yawa.
5. Ta hanyar sanya ruwa a wani kusurwa, cire fale-falen buraka tare da kwane-kwane. Girbi sakamakon halved, yankan komai da yawa. Ko, akasin haka, ba da saman abin da ya shafa.
6. Abubuwan da aka gama sun gama zuwa bangon santsi ga bangon kusa da juna ko tare da rata waɗanda suke kwaikwayi seam na masonry. To, idan ya cancanta, ƙasa kuma ta lalace.

Yadda ake yin suturar ado na ado

Mafi mashahuri madadin zuwa fale-falen gypsum masu tsada. Tsarin masana'antu mai sauki ne, amma musamman a kan manyan yankuna. Kasafin kudin yana da kadan, tunda farashin daidai yake da farashin filasan filasik, yayin da datse ya tafi. Godiya ga saukin magani tare da irin waɗannan fale-falen buraka, idan ana so, zaku iya ba kowane tsari da rubutu.

Me kuke buƙata

• Plastleboboard na kowane kauri;
• Sharp wuka;
• matakin;
• fensir.

Yadda ake yi

1. Zaɓi girman tubalin. Kuna iya bin rakodin kayan gaske ko zo tare da wani abu.
2. Cika busassun bushewa tare da layin fensir da layin layi daidai da aka zaɓa da aka zaɓa.
3. Swipe saman wani takarda a kan layin da aka bayyana. Yanke daidai, amfani da wani matakin, ba lallai ba ne. Ya isa kawai mu ci gaba da ruwa a kan ɗakin: ƙananan karkacewa zai ba da mutum kawai ga kowane bulo.
4. Juya filasan filastik, cire shi kuma kula da takarda da aka bari a gefe. Gajerun hanyoyi ba sa jefa: daga baya za a iya amfani da su azaman halves da ƙananan tubalin.
5. Idan kanaso, zaku iya yanke kusurwar kowane tayal tare da kwalin ciki, da kuma yin kwakwalwan kwamfuta da scratches don ba da kayan zane.
6. Fale-falen fale-falen da aka gama a haɗe su a bango tare da glue manne da juna ko tare da gibin da ake so. Bayan bushewa da manne daga tubalin, an cire saman Layer na takarda - don wannan yana busawa kuma yana bincika HIisel. Sannan farfajiya ta ƙasa, bayan wanda aka rufe shi da varnish ko fentin a cikin launi da ake so.

Yadda ake yin dutse mai kyau na plasterboard tare da plastered

Ingantaccen nau'in hanyar da ta gabata. Tushen fale-falen buraka iri ɗaya ne, amma an ƙirƙiri yanayin ta hanyar amfani da Layer na filastar. Wannan hanyar tana baka damar yin duwatsun kauri tare da agaji mai kyau da kuma kawar da bukatar cire kashin baya daga busassun, wanda ke adana lokaci a manyan kundin aiki.

Me kuke buƙata

• Plastleboboard na kowane kauri;
• tarkace filastar;
• Primer;
• wuka wuka;
• Filastik Kelma (ƙarfe);
• Sharp wuka;
• roller;
• matakin.

Yadda ake yi

1. Yin amfani da roller, bi da busassun busassun tare da na farko a garesu kuma bari bushe.
2. Theauki filastar filastar da ke dubawa a gwargwadon umarnin akan kunshin.
3. ARLDELka filastik Aiwatar da wani Layer na filastar a cikin 3-4 mm a farfajiya na GNC. Kada kuyi kokarin sanyaya shi cikakke, ba komai bane.
4. To, amfani da lycma zuwa takardar, motsa motsi tare da dogon gefen takardar don ƙirƙirar kayan rubutu.
5. A kan gefen kayan aiki don gefen tsiri na plaster da, kiyayye smoothlock a wani kwana, shãfe surface na drywall domin samar da ratsi-vertices. Wannan zai ba da yin kwaikwayon wani ƙarin ƙara.
6. Da zaran cakuda zai bushe kadan kuma ba ya tsaya a hannu, fale-falen biyun nan gaba bisa ga zaɓaɓɓen girma an sanya shi ga hannun.
7. Aiwatar da matakin zuwa layin da aka zana, ciyar da ruwa na spatula. Ba lallai ba ne don yanke filasta - ya isa ya yada Layer na filastar.
8. Bayan cakuda ya bushe gaba ɗaya, hawa dutsen a cikin wuka a layin da aka bayyana, sannan ka cire takardar kuma a yanka takarda daga gefe. Taya ta ƙare tare da wuka ko rasa su game da juna.
9. Bayan haka, farfajiya na fale-falen buraka an sake katange shi da zarar, ana fentin shi a launi da ake so kuma an haɗe shi da bango a kan m m m.

Yadda ake yin dutse na gypsum na ado a cikin tsari mai gina jiki

Wata hanya don samar da fale-falen buraka itace simintin gyaran ajiya daga cakuda gypsum. Armaser yana da rahusa kuma mai sauki. Za a iya yin sauƙin sauƙin da bangon yanki daga yanki na chipboard, tashar USB da fim. An samo duwatsu tare da ingantaccen lissafi da rubutu, ba ƙasa da siyar da fale-falen buraka.

Me kuke buƙata

• Tayal don samfurin;
• gypsum;
• guga;
• Kwalban filastik na 5-6 l;
• yanki na Chipboard;
• mai;
• fibrovolok;
• Soso don jita-jita;
• Cheble Channel 12 × 12 mm;
• Sukurori tare da mai lmer;
• filastik Celma;
• wuka wuka;
• roller;
• Sassaka.

Yadda ake yi

1. Da farko yin fom. Don yin wannan, sami yanki mai dacewa na chipboard ko fim. Auki mai yawa manne kuma yanke shi a cikin girman gindi.
2. Cire murfin daga tashoshi na USB mai suna kuma haɗa akwatin a kusa da kewaye da yanki na guntu da sikirin.
3. Yanke ƙauyen tashoshin na USB zuwa guda waɗanda zasu dace da girman fale-falen buraka. Shigar da su a wuri, sannan hau akwatin. Daga baya, spatula don rabuwa da tubalin za a saka cikin wadannan rumbun.
4. Dama a cikin kwalban filastik mai cike da filastar filastar da ruwa zuwa ga kirim mai tsami mai tsami kuma ƙara fiber fiji don bayar da ƙarfi. Madadin haka, yana yiwuwa a tsage jakar Polypropylene kuma kawai yanke zaren daga zane.
5. Zuba cakuda filastar a cikin tsari kuma a ko'ina raba shi. Dan kadan caku cim a gefuna don haka babu fanko. Lokacin da magungunan magunguna kadan, saro tare da sel filastik don gabatar da yanayin dutse.
6. Ba tukuna daskararre gypsum raba zuwa fale-falo. Don yin wannan, saka dogon spatula mai tsawo a cikin slot firam kuma latsa. Soso don jita-jita, shiga cikin simintin don samar da tsarin turi.
7. Cire firam daga kowane gefe kuma ɗayan cire fale-falen buraka. A hankali zana su da spatula kuma, idan ya cancanta, yanke wuka zuwa wuka.
8. Na gaba, duwatsun duwatsu suna da fentin. Bayan haka, an ɗora su a kan bango da manne manne.

Yadda ake yin tubalin ado na filastar da ke cikin saƙo

Hanya Hanya don samun manyan makircin inganci ba tare da matsaloli tare da yin tsari ba. A cikin ingancin fale-falen matrix, ana amfani da ginin bangarorin, za a zaɓi zane a hankali. Fale-falen buraka ana iya raba su daga Vinyl, abubuwa suna da kyau kuma mai inganci.

Me kuke buƙata

• Bereings;
• gypsum;
• PVA manne;
• fibrovolok;
• Plutty wuka.

Yadda ake yi

1. Idan kwamiti na mallaka ya daɗe, yanke shi don dacewa zuwa sassa biyu.
2. Shirya cakuda filastar daga lissafin 0.6 lita na ruwa, 1 g na fiber fim da 100 g na PVA manne da 1 kg na gypsum. Da farko soke manne a cikin ruwan sanyi, ƙara fiber da mai iya motsawa da kyau. A hankali ƙara filastar da kawo kayan haɗin zuwa taro mai kama.
3. Juya kwamitin ka cika cakuda a cikin kogo. Yi a gefuna na matrix don mafi kyawun cika. Slide da jefa casting tare da spatula, cire raguwar gypsum daga bangarorin tsakanin fale-falen buraka.
4. Jira cikakke bushewa na Billets. Rike da siffar a kan nauyi kuma, kadan sassauya, kyauta gefuna na fale-falen buraka, sa'an nan kuma cire su gaba daya.
5. Spantula a yanka mai bakin ciki ɓawon burodi tare da kwane na fale-falen buraka. Form kafin a cika gaba da kurkura da ruwa da tsabta daga ragowar gypsum.
6. Bayan haka, duwatsun suna cushe a bangarorin biyu kuma suna sa a bango a kan m m m. Idan ya dace da fari, ya isa ya rufe farfajiya tare da varynish. Idan ana so, ana iya fentin fale-falen buraka.

Yadda ake yin dutse na ado daga filastar ba tare da wani tsari ba

Mafi kyawun tsarin kuɗi kuma kawai zaɓi ga waɗanda ba sa so su dame su. Fale-falen buraka ba tare da wani nau'i ba, dama akan fim. Daga cakuda, an kafa Layer da ake so, wanda aka ba da kayan aikin da ake so. Sannan kayan aikin ya rabu da spatula a kan guda. Ya dace sosai ga kyawawan duwatsu da kuma tubalin mai laushi.

Me kuke buƙata

• Gypsum;
• fim mai yawa;
• wuka wuka;
• alama.

Yadda ake yi

1. Yi stencil daga fim mai zurfi na polyethylene. Zana grid a kanta, sel na wanda zai dace da girman fale-falen majiyoyi masu zuwa.
2. Yi cakuda. Don yin wannan, narke a cikin lita 0.5 na ruwa 9-10 tablespoons na filastar tare da zamewa kuma motsa su zuwa daidaito na kirim mai tsami.
3. A hankali zuba gypsum a kan fim wanda kuma wani yanki na grid kusa da kewaye yake, kuma a ko'ina rarraba cakuda tare da spatula. Jira kadan har sai gypsum yana farawa lokacin farin ciki, kuma cika gefuna na cika, ja da cakuda zuwa layin Grid Lines.
4. Haske ta hanyar spatula, ba da farfajiya na jefa kayan aikin da ake so. Hakanan ana iya rantsar da macushba maɗaukaci ko, akasin haka, yana da duwatsu a matsayin m.
5. Rufe gefuna da kayan aiki tare da spatula, sannan ka raba kayan aiki zuwa fale-falen buraka zuwa daban-daban fale-falen buraka, mai da hankali kan layin stencil stencil.
6. Bayan yana haifar da gypsum, ɗaga fim ɗin kuma raba fall ɗin kuma ku ɗauko su da spatula. Tsaftace ƙarshen duwatsun ta yankan ragowar ɓawon burodi na bakin ciki.
7. Abubuwan da aka gama sun ƙare kuma a haɗe zuwa bango tare da manne. Idan ya cancanta, farfajiya ana fentin ko an rufe shi da varnish.