Ado munduwa

Kwanan nan, kayan ado sun yi amfani da kayan adon kayan ado sun zama mashahuri. Wannan ya faru ne saboda gaskiyar cewa ana yin irin wannan kayan ado mai kyau da sauri kuma a lokaci guda suna ganin sabon abu da inganci.

A cikin wannan aji na Jagora, zamuyi bayani game da yadda ake yin munduwa dangane da grid kayan ado. Hanyoyin da aka nuna a cikin Jagora kuma za su yi amfani da ku yayin ƙirƙirar abun wuya da abin kunne daga grid. Hanya don kammala ƙarshen ado, da aka bayar a cikin babban Jagora, shine mafi aminci madadin amfani da na gargajiya na adreshin isar da advers, ciki har da shi ya dace da halayyar wakoki.

Don haka, don aikinmu, muna buƙatar kayan aikin masu zuwa:

1. Krugogs
2. Popers
3. Kushachachi
4. Jakar Bead ko jaka mai zip tare da kusurwa mai cike da ƙarfi
5. Almakashi
6. Kayan aiki don aiki tare da sau biyu ringlets (na zaɓi, idan kuna son rataye a kan munduwa dakatar)

Abubuwan da aka yi amfani da su don ƙirƙirar munduwa za a iya raba su zuwa rukuni 2: Grid da kanta da cika / kayan ado (sakin layi 1-6); Kayan daki don kammala munduwa (sakin layi 7-10).

1. Kayan ado na ado 8 mm
2. Beads ko beads don cika grid.
3. Karfe beads tare da babban rami don Rugging (don aiki mai kyau, ramin dole ne ya zama aƙalla 2 mm)
4. Mai riƙe don dakatarwa
5. Zoben haɗe tare da girman 4-5 mm (don dogaro da shi ya fi kyau a yi amfani da ninki biyu)
6. Dakatarwa
7. 2 fage ko mazugi a cikin hanyar mazugi. Diamita na ƙananan ɓangaren mazugi dole ne kusan daidai da grid diamita. Wannan ya fi yadda mazugi ne, mafi sauƙin ɓoye ƙarshen grid a ciki.
8. 2 Modpa mai tsafta 3 mm ko 2 Modpa na al'ada tare da rami akalla 2 mm
9. 2 dogayen fil (5-7.5 cm) ko wani waya tare da kauri daga 0.6-0.8 mm
10. Zip (mun yi amfani da Togl, amma zaka iya ɗaukar kowane rungume a cikin zaren daya da ya dace da munduwa)

Matsayi 1. Gyara tip na Grid da Kmp

Eterayyade lokacin da kuke buƙatar munduwa, kuma yanke wani yanki na kayan ado na kayan ado girman. Fasterener, dangane da nau'in da girma, zai ƙara zuwa tsawon munduwa 1-2 cm, amma yayin aiwatar da aiki tare da grid ɗin da za ku iya zuwa lokaci-lokaci zai kawai sata daga grid.

Kafin fara ajiye raga, muna bukatar mu gyara ɗayanta ya ƙare don kada ya fita daga ciki. Don yin wannan, matsi da ƙarshen grid tare da yatsunsu don ya zama bakin ciki kamar yadda zai yiwu:

Rufe zuwa ƙirar ƙirar ƙwayar crpl a cikin wannan hanyar cewa ƙaramin yanki na grid ya fito daga ciki:

Tsaftace tapan tappelings. Na farko gefen czpa:

Sannan tagulla a kansa ya sha bamban:

Yanke da kerboard kamar yadda zai yiwu don kada ya tsalle ya zama mafi karfin abubuwa yadda zai yiwu. Lura cewa crpp yana buƙatar haifar da gashin baki, kuma ba a cikin kullun (Jack) ba. Hakanan zaka iya amfani da abubuwan da aka saba, wanda ba mai ladabi ba, babba sosai saboda shi don amfani da Grid.

A hankali ka tabbata cewa duk zaren Grid ya dace da CMP kuma ba ta fito da shi ba. Yana iya zama mafi dacewa a gare ku don matsewa da girgiza, kiyaye grid don "wutsiya".

Abin da ya kamata ku samu sakamakon:

Mataki na 2. cika da grid ado

Tare da triangular trochgular, ya zage beads a cikin kusan kwata na tsawonsa:

Za ku iya, maimakon trawl, zai fi dacewa a gare ku ku yi amfani da jakar zip tare da sliced ​​kusurwa:

A wannan matakin ya cancanci bincika idan wani rikicewa yana da kyau a kan grid da aka cika. Kawai sanya shi a kan tid na grid a matsayin hat, ya kamata dacewa da sosai a bangarorin:

Tabbatar cewa mazugi ya dace, za mu cire shi gefe guda kuma mu ci gaba da yin ado da grid. Matsi da tifi, muna hawa dutsen a kai:

Matsar da dutsen a cikin grid cikin grid, muna yin barci da beads da yawa kuma muna hawa mai riƙe da Grid:

Dole ne mai riƙe ya ​​kasance a tsakiyar munduwa. A wannan matakin, an bada shawara don bincika ko tsawon lokacin an samo tsawon kuma, idan ya cancanta, cire mai riƙe da shi, dunƙule ko matsi wani ɓangare na dutsen. Lura cewa munduwa zai zama ɗan lokaci kaɗan saboda ƙari na mafi daraja.

Bayan haka, mun kammala ado na raga:

Kuma matsa shi tare da kilm, kamar yadda aka nuna a sama:

Yanke da wuce haddi grid, ya bar wasu milimita saboda Kim bai yi tsalle ba:

Mataki na 3. Decor na ƙarshen da kuma abin da aka makala na da sauri

Yanke daga Pina Hat / Ushko don samun yanki na waya:

Populate da raga tare da raga kusa da yadda zai yiwu zuwa clamping cheta:

Bend Pin a cikin rabin kamar haka:

Nika sakamakon gashin baki a cikin rikice:

Casting a ƙarshen pina tare da famfo da na biyu rike da mazugi, saka shi a kan raga:

Beat da iyakar Pina a cikin fuskoki daban-daban a wani kusurwa na digiri 90 zuwa grid:

Yanke iyakar, barin kusan 1 cm:

Yana jefa zagaye-rolls don gefen waya, sanya madauki, ya lullube shi zuwa cibiyar, zuwa ga ramin gargajiya. Kada ku matsa zuwa ƙarshen, zai zama da sauƙi a haɗa da fastener:

Bayan an yi daidai da ƙarshen na biyu na Pina, mun sami irin wannan zuciyar:

Muna suttura a kan biyu murfi akai-akai fasteren:

Kuma danna madauki:

Hakanan, muna haɗa yanki na biyu na sauri. Zai yuwu yin madauki na ƙarshen pina a lokaci guda. A wannan yanayin, mafi kyawun abin da ya fi sauƙi a saka, duk da haka, lokacin da ƙarshen ƙarshen ya tanƙwara a cikin daban-daban daban-daban, saurin shine mafi aminci, wanda yake da matukar muhimmanci ga mundaye.

Mataki na 4. Haɗa dakatarwa

Mun tafi don haɗa dakatarwar da aka zaɓa zuwa mai riƙe da shi. Don dogaro, za mu yi amfani da zobe biyu. Tare da taimakon ingantaccen kayan aiki, muna buɗe zobe:

Sanya abin wuya da riƙe a ƙarshen zoben da shimfiɗa zoben gaba ɗaya ta hanyarsu:

Munduwa mun shirya:

Taya murna ga dukkan munters tare da lokacin bazara mai zuwa! Muna fatan wasu abubuwan da suka faru da kuma ra'ayoyi masu ban sha'awa!

Tushe