Daga wannan aji na Jagora zaka koyi yadda ake yin hat By rim yi da kanka.
Wajibi ne a shirya kayan aikin da kayan:
- Rufe almakashi;
- almakashi "Zig-Zag";
- Tashin hankali tare da matuƙar ƙare;
- fensir mai sauki;
- da'irar;
- zaren don dinki;
- allura don keɓaɓɓen gumaka;
- layi;
- manne "lokacin karrafallen keral din";
- gashin fuka-fuka na CEShAk, daban-daban masu girma, 5 inji mai kwakwalwa.;
- Kwali mai yawa, girman kusan 15x15 cm;
- Kafafan Silinda;
- Farar fata tare da babban tsari;
- Lace baƙi kunkuntar, 1.5 cm fadi, tare da gefen tsuntsu daya;
- beads madara da ruwan hoda;
- kintinkiri na azurfa na 4 mm;
- tef white satin Theright 2 cm;
- Gashin manue (Shabrak), auna kusan 15X15 cm;
- Sše masana'anta baki a cikin farin farin Peas;
- boujin baki manyan.
Yi la'akari da jerin ƙirar hat.
Daga kwali kuma Shabrada a da'irori da diamita na 13 cm. Shabrak Mun tsaya a Knitwear da baƙin ƙarfe.
Tare da taimakon almakashi "Zig-Zag" tsari na waje yanke na da'irar. Wannan zai nisantar da masana'anta.
Hat an tsara shi don miya a kan rim, za a haɗe shi da madaukai.
Fensir mai sauƙi shine sanya wurin da ramin a ƙarƙashin madauki a saman gefen aikin.
A kan silinda silinda daga ƙarshen gefen muna manne kasan kwali. Daga Knitwear, yanke da'irar, diamita daidai yake da diamita na silinda + 2 cm.
Mun tsaya da'irar saƙa akan silinda donyshko katin.
Daga KnITWEAR mun yanke tsiri. Tsawonsa daidai yake da girth na silinda + 1 cm, tsawo shine tsawo na silinda + 2.5 cm.
Bangaren sama na kusa da baya dole ne a sami ta 1 cm.
Mun sa ƙungiyar a cikin zobe (a ƙarshen sassan). An datse seams.
Mun tsaya baranda blanks a kan silinda silinda.
Ƙananan sassan suna sanye da ciki na silinda.
Mun auna tsawon da kewayen kwali a karkashin filin hat. Don wannan darajar + 2 cm mun yanke bandejin daga saƙa. Girman shi ya zama daidai da radius na filayen + 1.5 cm.
Guda ɗaya na tsallakewa ya fara daga 1 cm. Tsiri keki a cikin zobe.
Mun raɗaɗi lane zuwa Billetard na Billet (daga gefen da ba daidai ba). Sannan a gaban gefen filayen muna tattara banden kiɗan a cikin kananan fannoni. Idan kauri daga cikin kwali yana ba ka damar gyara su ta hanyar walƙiya ta hanyar kwali. A gefen gefen filayen huluna, kunkuntar yadudduka yadin da aka kwace a cikin ƙananan folds.
Mun manne silinda a filayen huluna.
Muna yin ado da farin hat da yadin baki.
A saman beads lace toshe. Anan zaka iya amfani da matsefers tare da m ƙare. A gare su ya kiyaye beads, ya tsoma shi a manne kuma glued zuwa wurin da ya dace.
A mataki na gaba, mun manne (zaka iya dinka wuraren tsinkaye na gidaje.
Daga farin kintinkirin da muke yiwa wani karamin baka baka, daga kintinkiri na azurfa - wutsiyoyi zuwa gare shi. Manne ne a cikin hat. Babban naman alade za a iya glued zuwa tsakiyar baka.
Sun fi girma da manyan fuka-fukai kusa da bayan huluna, kuma karami da gajeru - kusa da gaba.
A cikin ƙananan ƙananan ɓangaren filayen filayen, muna yin ramuka a ƙarƙashin hinadewa akan aikin. A cikin waɗannan ramuka sun saka hinges daga kintinkiri na azurfa. Mun manne musu. Sannan muna sanya kasan filayen zuwa hat.
Hood hat! Yanzu ana iya saka shi a kan kunkuntar Bezel kuma yi ado da salon gyara.
Tushe