Marubucin aikin shine La Luna (Irina Polycova).
Wannan abin saƙa na ƙirƙira lokacin da aka tattara da beads tare da ƙananan furannin fure daga Satin Ribbons da furannin polymer. Hadarin shi ne tabbatar da cewa wadannan abubuwan ba sa jefa kan sock. Sabili da haka, irin wannan hanyar makwancin soad an dace da wadanda suke tsunduma cikin lamuran masu wuyar cinta.
Kayan aiki:
- Beads
- Beads
- Monhofila
Kayan aiki:
- Bead allura 2 inji mai kwakwalwa. (ba lallai ba)
Kada ku ji tsoron wannan adadin hotuna, a zahiri, komai mai sauƙi ne. Don mafi girma tsabta kusa da tsarin aiwatarwa.
Ba zan nuna girman beads da beads ba, don sawa abu ne mai ma'ana. Dead zaren ya kamata a yanke lokaci daya, na auna ido, amma bisa ga lissafin da na dauki kusan 8.5 - 9.5 cm beads a daya hanyar (watau, beads biyu tsakanin beads), duk yana dogara da girman beads da beads. Ga wani aji na Jagora, Na yi amfani da zaren Kapron maimakon Monofiti, saboda Ya ji tsoron cewa hotonta ba zai zama a bayyane komai ba. Ba na amfani da allura, kuma idan kai, ma, ba zai zama a hannu ba - ba tsoro ne. Idan kuna kuka a cikin zaren, zaku iya tsoma baki na zaren a PVA manne, kuma zaren ba shi da kaifi, kuma zaren ba ya bushe.
Da farko kuna buƙatar zaɓar kulle ga beads ko munduwa, na zaɓi Togl kuma tare da taimakon madauki mai sauƙi yana gyara zaren (hoto 1-2).
Yanzu saƙa kanta. Da farko, buga bisper daya a kan duka iyakar gefe, to, beads (hoto 3).
Yanzu a kan duka ƙarshen zaren, kuna buƙatar buga irin wannan adadin Bakandar don su sami dutsen gaba ɗaya, kuma kar ku manta cewa belumai biyu sun riga sun zira kwallaye biyu (hoto 4).
Kuma yanzu yana da muhimmanci kada a rikice. Ina musamman a cikin zane na ƙwararrun ƙarshen zaren da launuka daban-daban. A cikin Bead na farko, zaren ya shiga hagu, sannan zuwa dama a na biyu; Kuma a cikin Dutsen na biyu, zaren ya shiga hagu, sannan a dama a farkon (hoto 5). Lokacin da ƙarshen zaren ya riga ya yi ciniki zuwa Biyerin, da farko ya fi gaba da bead a gidan, don kada ya sake da baya, kuma kawai ya ɗaure ƙarshen ƙarshen zaren ɗaya.
Muna ja da ƙarshen zaren, bitrers 1 da 2 yanzu ya juya da faduwa a kusa da beads (hoto 6).
Dukansu ƙarshen zaren suna cikin wead (hoto 7b) kuma ta hanyar iri biyu suna zuwa zuwa ramin zuwa ramin, za mu zana ƙarshen zaren kamar yadda aka nuna a cikin duka biyu da aka nuna a cikin duka biyun bitocin) da jinkiri.
Idan magudi na baya da kuka kware, to zai zama da sauƙi. Muna daukar beads biyu na kowane ƙarshen zaren, sannan beads (hoto 8).
Yanzu mun dauki irin wannan da yawa na Bakano domin su woads (hoto 9).
Muna maimaita ayyukan kamar yadda a cikin hoto 5 da 6, saboda haka beads biyu sun kasance tsakanin beads mai launin shuɗi (hoto 10).
Yanzu maimaita wannan ayyukan da suka yi da hoto na farko 7.
Ka'idodi ina tsammanin tuni ya fahimci hakan, ba zai iya zama mai hankali ba
Da kyau, sakamakon kanta.
Kuma a nan ne manyan beads tare da malam buɗe ido da furanni, daga abin da ya fara.
Ina maku fatan samun nasara!
Tushe