Kayan da ake buƙata don aiki:
- beads lambar 10 shuɗi
- beads lambar 10 kore
- waya waya ko launi mai launi 0.3 mm a diamita
- mai waya 1-1,5 mm a diamita don firam
- fitilu, almakashi
- Green zaren kore don winding mai tushe da shuɗi don tattara berries
- Green tef na fure na fure
Sukan sawa berries inabi
Ya kamata Berry ya zama faɗaɗa girma, a kan wannan zai iya zama saƙa tare da taimakon fasahar Faransa tare da ɗakunan ƙarfe. Yanke wayoyi 4 kusan 25-30 cm, karkatar da su tare a cikin katako ta amfani da waya mai aiki, wanda ya kamata muddin zai yiwu. Yanzu hotunan gani da hotunan gani sun fara sawa. Muna ɗaukar nauyi 1 Biyerino don yin aiki, muna jujjuya axis mafi kusa, muna ɗaukar shinge na gaba da sauransu (hoto 1-6).
A cikin aiki, ƙara yawan beads a cikin sahu don karuwa ne uniform kuma ba tare da fasa tsakanin beads da waya ba. Bayan kun saka layuka 5, ya kamata ku sami irin wannan hat - hoto 7. Yanzu bi girman innabi, ya ƙara yawan jere, kar a ƙara da yawa, samar da siffar ƙwallan. Bayan jere 6-7d jere, fara tasirin, amma duk hanya ya dogara da ra'ayin ku da girman da ake so.
Kafin ramin yana da karfi sosai, kar ku manta da cika tare da blue threaded tare da blue bead. Lokacin da innabi za a saka, karkatar da ƙarshen waya kuma kunsa zaren. Tsaftace pva manne don gyara iska.
Innabi Innabi
Yanke wayoyi biyu, karkatar da juna ta yin fom ɗin slughot, kunsa zaren da ya ƙare a kan rike ko kuma lokacin farin ciki knob, don haka ne samar da curls. Yi da yawa irin-iri, yana da kyawawa sosai cewa sun bambanta da juna, kamar yadda aka nuna a hoto da ke sama a hannun dama. Marubucin da suka juya kamar rai!
Innabi ganye
Ganyen inabi yana da wahala sosai, saboda haka idan baku da gogewa wajen sanya irin waɗannan ayyukan, ya fi kyau a fara aiki da farko a aikin mafi sauƙin aiki.
Yanke kore waya na matsakaicin tsayi, cinye 4 kore beads, koma baya ta beads uku, ya kara da cewa kuna da babban axis don samun ƙarshen aiki. Yanzu yi madauki a kusa da babban jeri, rubuta yawan beads da ake so zuwa ƙarshen aiki, zo zuwa tsakiyar jere na tsakiya a gindi (hoto 2).
Wannan takardar ta murƙushe matakan. Muna daukar beadaya 5 beads, manne a tsakiyar littafin takarda (hoto 3), muna sanya nau'in bugun jini 7 kuma ka gangara zuwa gindi daga cikin wannan gefen. (Hoto 4-5). Lokacin da kuka saka matakai uku na ganye, kuna buƙatar yin leji. Don yin wannan, kuna buƙatar ci ƙarin bisper, samar da tabbaci mai kaifi (hoto na 7-8) kuma komawa zuwa gindi. Maimaita gefe na biyu.
Ci gaba da saƙa ganye na innabi daga beads akan wannan ƙa'idar. Kowane ƙananan jere mai zuwa ya fi fadi fiye da wanda ya gabata (Hoto na 10-13), amma idan ta shirya don sake tsaftataccen takardar, hoto na 14-15). A hankali na bincika hoto da ke sama da kanka da kansa mai sa maye.
Muna fara cinye gefen hagu na kwandon. Haske rabin kamar yadda aka nuna a hoto 16 kuma haɗa shi a tsakiyar tare da gefen ganye. Ci gaba da saƙa ganyayyaki ya jingina a gefen ganye (hoto na 17-20) zuwa ƙarshe. Maimaita guda a gefe guda (Hoto na 21-22).
Yanzu kuna buƙatar kammala takardar, gama wannan kuna buƙatar saƙa biyu halves biyu, kamar yadda aka nuna a hoto 25 kuma aika ganye innabi zuwa ƙananan gefuna. Don haka takardar mai yawa yana ɗaukar siffar lokacin farin ciki Waya kuna buƙatar yin firam. Kunsa shi tare da sandunan kore (hoto 27), sannan a saka shi a bayan littafin takarda (hoto na 28-29).
Hakanan zaka iya saƙa da ganye da ƙasa da amfani da hanyar ta biyu wanda firam ɗin nan da nan ya cika aikin kamar yadda aka nuna a hoto 31-32. Sabili da haka duk abubuwan da suka biyo baya na wannan takarda. A ƙasa a cikin hoto da kuka ga zaɓuɓɓukan da aka shirya biyu. A hannun dama akan firam da aka makala, kuma an saka hagu.
Kyakkyawan ra'ayi da kuma sabon abu dabaru da muke gani a wannan aikin. Mutane da yawa godiya ga Tatiana don cikakken cikakken aji, wanda zai zo a cikin mutane da yawa!
Itacen inabi na iya yin kwanciya a cikin wani fannonin a cikin bututu ko ado da gidanka a cikin wani karamin itace.
Tushe