A yau za mu sami aji mai kirkira daga mashahurin yarindan a ƙarƙashin Nickner Aleksanta. Daga littafin kai za ku koya game da dabarun madauwari mai saƙa daga yumɓu polymer.
Don aiki zai zama dole:
- polymer yumbu na launi da kuka fi so. Marubucin ya yi amfani da filastik na Polish - Terracotta don saƙa da baƙi don ƙirƙirar tushen. Yi ƙoƙarin ɗaukar filastik da yumbu mai laushi;
- Extuper-Extruper-EXPURE don yumbu na polymer;
- Rufin Dump (zaka iya amfani da tashar jirgin sama ko na musamman don aiki tare da filastik);
- Wasu irin convex surface don yin burodi. Marubucin ya yi amfani da kwan fitila mai sauƙi, amma zaka iya gwadawa, babban yanayin shine kayan zai iya jure da dumama zuwa digiri 130.
Don wani yanki mai lalacewa, ɗauki bututun ƙarfe tare da ramuka na ƙaramin diamita.
Yanzu kun shirya tushen kuma sanya shi a kan farfajiya. Yanke da'irar daga pre-birgiro na robobi, ba da zane zuwa kayan rubutu kuma ba wasu nauyin ƙarfe ta amfani da foda. Za'a iya kula da tushen filastik don dacewa.
Tare da taimakon waka, mai kauri-bakin ciki-zaren da aka matse daga filastik.
Irƙiri karamin ball fils da amintar da shi a tsakiyar gindin.
Yanzu mun fara sanya zaren daga wuta kuma a tsare su zuwa tsakiyar.
Don m weaving, matan za su buƙaci abubuwa da yawa - a cikin lamarin a cikin su akwai su.
Lura, zaren don gindin tushe dole ne a yi lamba mai ban tsoro! Saboda haka, zaren na ƙarshe shine tsari guda ɗaya.
Yanzu cewa an sanya kwalban tushe, suna sanya makamancin wannan aikin saƙa zuwa cibiyar kuma fara hawa ta. Ga kyakkyawa, mun dauki zaren biyu. Zaɓin matsayin agogon aiki na saƙa (sannan daga kasan, to, a saman gindin tushe), muna ƙirƙirar tsarin tsarin gaba.
Anan ne farkon zagaye na farko. Kuma a nan muna ganin kawai muna ganin cewa shi ne adadin m zaren tushe wanda zai ba ka damar watsa brain da dukkan zaren wucewa a saman, sannan a kasa. Wannan lamari ne mai mahimmanci!
Muna ci gaba da yin saƙa da izgili, lura da dokar saƙa.
Idan wani abu yana buƙatar gyara, muna sanya shi wasu kayan da ya dace. Yana yiwuwa wuka ɗaya ne.
Ba da jimawa ba, ko da baya, za a ƙara yawan agogon aiki na saƙa. Don yin wannan, muna amfani da ci gaba da zaren, kamar yadda aka nuna a hoto, kuma sannan dan kadan ya mirgine wurin yatsunku a ko'ina cikin zaren haɗin gwiwa.
Muna ci gaba da sawa har zuwa duk kayan aikin ya karye.
Karin Nasihu daga cikin zaren da keɓa wa wuka.
A ƙarshe, latsa ƙarshen zaren zuwa tushe, gyara siffar da bulon - braid, idan an buƙata.
Nan gaba muna gasa amarya daidai da shawarwarin masana'antar polymer yumbu.
Bayan yin burodi, ƙara kyawawan kayan ƙayatarwa da yawa ga abin da muke wuu. A cikin lamarinmu, babban hemisphere na tsakiya, wani corrosive tsare da kuma sauƙaƙe kashi na Braid. Duk toned tare da karfe foda, braid da kanta shine inuwa mai haske tare da fenti mai.
Rubuta ta Aleksanta.
Tushe