Akwai abubuwa masu aiki, akwai kyawawan abubuwa, kuma akwai wadanda ke haifar da hassada a wasu.
Jagorar jakunkuna daga wannan malamin, watakila yana nufin rukunin na uku.
Tabbas, kowace rana ba ku fada cikin ofis, amma a wani biki, babu shakka, wannan kyakkyawan kayan haɗi zai jawo hankalin ra'ayoyin wasu.
Don yin jaka, muna bukatar:
- Akwatin wucin gadi ya tashi fure (ana iya samun su a cikin shagunan sayar da bikin aure ko kayan lambu na bikin aure);
- Mirrican masana'anta;
- wani nau'in zomo.
- wani yanki na bakin ciki filastik (brexiglass);
- Sarkar don jaka na hannu;
- Kullewar Magnetic;
- D-zobba;
- rungume biyu;
- Sarge da siliki;
- kafafu don jaka.
Kayan aiki:
- lokacin farin ciki allle don fata / fur;
- wasan na bakin ciki na yau da kullun;
- zaren;
- layi;
- fil;
- yanke;
- almakashi;
- mini dill.
Mataki na 1.
Daga takardar na bakin ciki filastik a yanka guda uku. Biyu don sassan ɓangarorin jaka, kowane 30 * 8, ɗaya don kasan 20 * 8.
Mataki na 2.
Daga masana'anta mai sanyi mai sanyi a yanki na mayafi 70 * 22 cm. Da guda biyu don suttura 31 * 9 (girman an ba su, la'akari da izini don seams). Daga masana'anta mai rufin, a yanka daidai guda guda.
Mataki na 3.
Don sauƙaƙa kewaya, kuna buƙatar filashi kasan jaka. Don wannan, mun yanke shawarar kowane yanki na 31 cm (tsawo na samfurin + 1 cm a kowane gefe zuwa izni. Muna yin layi biyu da ke layi da hannu.
Mataki na 4.
Mun fitar da furannin kamar yadda aka nuna a hoto, gyara su da fil.
Mataki na 5.
Muna filla da furannin itace tare da jan zaren.
Mataki na 6.
Hakanan, muna yin tare da sauran layuka na petals. Wajibi ne a sanya su a cikin wannan hanyar da kowane layi mai biyo baya ya rufe seams a baya.
Mataki na 7.
Yanzu kuna buƙatar ɗaure ƙafafun zuwa jaka. Don yin wannan, muna yin ramuka a cikin wani nau'in filastik na bakin ciki, wanda aka yanke a gaba, bayan wanda muka sanya filastik a cikin jakar, kuma tare da waje, ƙwayayen kafafu don su samu a cikin ramuka a kan filastik.
Mataki na 8.
Mun ci gaba zuwa mafi hadaddun - Jawo saman jaka. Don yin wannan, ɗauki Jawo, mun sanya jakunkuna akan aikin kayan da wadata.
Mataki na 8.
Tare da taimakon fensir da mulki, auna yanki da ake so.
Mataki na 10.
Yanke wani fur da mai yanke.
Mataki na 11.
Zai yi wuya a yi aiki tare da fur, saboda kada ya karye cikin villi, gefuna na kayan aikin shine mafi kyawun ɗaukar tef na Sarge don haka, don haka aka nuna a hoto. Bugu da kari, zai sauƙaƙa aikin dinka a saman jaka zuwa babban daya.
Mataki na 12.
Sevive masana'anta mai rufin, pre-amintaccen wani magnetic a ciki.
Mataki na 13.
Muna yin madauki don madaurin sarkar. Don yin wannan, yanke guda biyu na rectangular guda 6 * 2 cm, muna ɗaukar su cikin rabin, muna manne da D-ring.
Mataki na 14.
Aika Hinges zuwa jaka.
Mataki na 15.
Aika rufe jakunkuna zuwa babban sashi.
Mataki na 16.
Daga sama, don filastik ba a yi watsi da filastik ba, mun sanya ƙwayar rufin kuma yana walƙiya a cikin ninki biyu.
Mataki na 17.
Mun sanya ziketic zikt a gaban jakunkuna ta hanyar da ta yi daidai da wanda ke kan saman jaka.
Mataki na 18.
Don ɓoye waƙoƙin aikin da aka yi, zaku iya dinka wani layin petals.
Mataki na 19.
Ya rage don haɗa sarkar. Don haka ta yi kyau a hankali, zaku iya tsallake cikin zoben sarkar satin kintinkiri.
Mataki na 20.
A ƙarshen sarkar a kowane gefe, haša runguma, ragowar kintinkiri kintinkiri.
Kyakkyawan jaka a shirye!
Tushe