A yau, aji na maigidana an sadaukar da shi don "ƙyalli".
Na raba hanyata wacce ba ita kaɗai ba ce, amma a maimakon haka, ɗayan zaɓuɓɓuka. Wannan hanyar da nayi amfani da gyaran bude waje na bude waje, don bakin wayar hannu, da alama za a iya yin ta wata hanya. Koyaya, Ina fatan wannan hanyar na iya zuwa cikin hannu ga wani. Wataƙila za ta matsa don neman zaɓin kanku.
Don ƙirar haƙoran haƙori "karni" Na yi amfani da filastik, wanda ya juya ya kasance a hannu. Kuna iya amfani da wasu abubuwan robobi masu tsari ko hanyoyinsu. Don tanda na kai, saboda haka, ba za a buƙata ba.
Kuna buƙatar kayan:
Tashi don yin zane-zane (ƙwayoyin cuta mai kyau da aka nuna a cikin hoto 1).
Waya na bakin ciki (Na yi amfani da kauri daga 0.5 mm).
Filastik gasa (Na yi amfani da FIMO mai laushi, wanda yake a hannu. Kuna iya FIMO Classic, Cernit ko wani).
Manne ne mai tsayayya (Na yi amfani da lokacin da na gargajiya shine duniya).
Glue wand (dace da maricure ga katako na katako).
STORE ZOTU (Na yi amfani da №10).
Allura daga doll dinki da kayan wasa mai taushi.
Kayan suttura na yau da kullun.
Zaren don dinki (Na yi amfani da 45l).
Acrylic fenti (Na yi amfani da fari kuma tare da tint mai launin shuɗi).
Acrylic varnish (zaka iya duka biyu matte da kuma mai sheke).
Artistic Brake Brake Syntntics (kamar lamba 5-6).
Kananan mayafi (filaye tare da hanci mai kunkuntar).
Almakashi.
Home tnenace - tanda.
Mataki na 1
Muhimmin! Kafin yin zane, ya zama dole don fallasa sosai a cikin hannayen filastik zuwa jihar drig. Idan fashewar filastik, yana nufin an wanke shi da kyau, ko tsohuwar, wanda tabbas zai shafi aikin.
Mataki na 2.
Auna tsawon waya gwargwadon girman bakin. Guda biyu: don saman da ƙananan muƙamuƙi daban. Tsawon waya daidai yake da tsawon lokacin da ake zargi da cewa "prosthesis" akan 2. Nufo waya ya sau biyu, ba barin madauki a ƙarshen ba. Ya dace da usat.
Mataki na 3.
Kalli sagin da aka karkatar da suttura na wire hb don haka wutsiyar zaren ya kasance a farkon iska. Ya tafi daga wannan ƙarshen zuwa ɗayan kuma baya, komawa zuwa wutsiya na zaren. Dukansu wutsiyoyi na zaren da aka ɗaure tare don kiyaye zaren, ba su narkewa ba. Ana buƙatar rauni a kan waya da ake buƙata don amintaccen tasirin filastik tare da firam.
Mataki na 4.
Abubuwa biyu kananan kwallaye don babba da ƙananan "prosthesis" da aka shirya daga filastik masana'antu.
Mataki na 5.
Shiga filastik da aka gina filastik. Wajibi ne a shafa filastik a cikin bakin zaren har zuwa riƙe, yayin da filastik ya fara manne da zaren kuma tare da wahalar yin jinkirin. Samar da farko "tsiran alade". Sannan sanya shi lebur, ba ma bakin ciki ba.
Mataki na 6.
Tushen yana yankan fang game da tsakiyar tsiri dangi zuwa sararin samaniya. Tsakanin fagafar daga tushe, yanke ƙarin filastik (ta sararin sama). Kuna da rabin tsiri tsakanin fangs.
Mataki na 7-8
A sashi tsakanin fangs, scratch trips (kwaikwayon hakora). Ana iya azabtar da su da jaka mai kyau, yankan stoothed. A wutsiyoyi "prosthesis" suna samar da matsin lamba mara karfi ba ya da bakin ciki.
Mataki na 9.
A cikin wutsiyoyi "da aka tabbatar" a duka iyakar, soki da allura allura. Yanke "prosthesis" a karkashin "hakar ma'adinai" da ake so don beyar.
Mataki na 10.
Shirye "karuwa". Sanya gasa a cikin tanda a digiri 110-130 na minti 30 (don FIMO, cernit). Bayan yin burodi an sanye da shi a zazzabi a ɗakin. Kuma ya fi kyau a ba su tsayawa aƙalla awa 1.
Mataki na 11.
Duk da haka "mujada" tare da bakin ciki na acrylic paints don ba su ƙarin halitta, na zahiri. Bayan bushewa fenti, shafa ƙarshen Layer - acrylic varnish. Ba bushe.
Mataki na 12.
Buga "Protoan", Cigaba da manne a gindinsa, zuwa ƙananan muƙamuƙi. Kuma don amintaccen sauri, suna kuma sanyaya wutsiya na "prosthesis" ta hanyar madaidaiciyar zaren a cikin launi na "prosthesis".
Mataki na 13-15
M yaren ga ƙananan abin da ya dace da kabu. A cikin hoto - sakamakon da aka gama.
Mataki na 16.
Bayan an kama manne a ƙarshe, yana ƙoƙarin akan PIN ɗin kuma dinka a cikin muƙamuƙin muƙamuƙi tare da zaren subs.
MK - Gemma Kaj.
Tushe