Na riga na kafa kayayyaki 4 da aka yi tare da taimako, Albeit aƙalla na ƙaho da arha, amma har yanzu ƙarfin wutar lantarki. A cikin sharhi ga posts, akwai mutane koyaushe waɗanda suke koyaushe: "Kuma abin da ba zai yi wannan da samun irin wannan kayan aikin ba." Wanda koyaushe na amsa cewa samfurin yana da sauƙi kuma ana iya yin shi tare da taimakon mafi ƙarancin kayan aikin, Chisels, daskararru, Sandpaper da manne.
Don haka ba za a iya tantancewa ba, na yanke shawarar yin matattarar tebur (bisa ga ka'idar kan teburin titi) ta amfani da hacks kawai, Sandpaper da manne. Kamar yadda kake gani an maye gurbin Chislel ta wuka, ba a cire rawar jiki.
Tunda hotunan sun yi nasarar ware, kuma abin da zai faru ba su sani ba, don haka wasu hotuna United "zuwa" da "bayan" bayan "bayan" bayan ".
Da kyau, sannan nunin faifai tare da bayani, kuma ku tunatar da kai: Ni ba kwararre bane, ni ba mai son, ni ne mai son rai, Ni mai son ne da ke son rikici da itace.
Kayan aiki da aka yi amfani da shi a keran kuturu, sandpaper na daban, mafi girma hatsi kamar 32 ago, lokacin da ta yi kokarin nisanta cat a kan murfin) da kuma Ragowar da'irori daga ƙwayar ƙwayar ƙwayar ƙwayar 60, 120, 180. Kuma zanen gado da yawa 40-Ki da 600ki (ba da amfani).
Pine itace, mirgine sanduna 6 na 6 * 40 2 mita don jimlar 240 an saya a cikin shagon.
Da farko dai, na yanke shawarar gungumen, wanda bai yi kamar a yanke shi a cikina ba, amma abubuwan da suka faru na zaruruwa. Kamar yadda za a iya ganin gefen yanka, yana da tsabta, ba tare da haske ba, kuma yana da sauƙin ɗauka, kuma yana da sauƙin ɗauka, kuma hakane don fara yanke, da hakora na wanda aka gani ya riga ya shiga.
A baya can Skiatchape ya zama zane na matse-lafiya tare da duk lissafin, amma an dakatar da zane a gida da kuma dukkan masu girma dabam da aka dauke daga kai.
Glimas takwas Lamellas don kujerun Tababere:
Kuma na gano cewa wani wuri ba daidai ba ne, wurin zama square ...
Duk sun motsa sabuwa, ƙara wani lamella kuma komai ya fito. Kawai kuskure ne. An zaci cewa stool din zai zama "Cubic" tare da gefen 36 cm, a sakamakon haka, ya zama mai siffar, amma tare da a gefen 40 cm. Kadan kadan kuma sama da yadda ake tsammani.
Blooming matakin farko na tsarg, wanda Lamellas zai yi ƙarya. Advesion pre-kwanciya da tsargi zuwa tef mai duhu.
Wannan ita ce ranar farko ta aiki (3 hours).
Kashegari, a daidaita wurin zama na Sandpaper har 32 Praniti Gyara akan Bruka. Ban yi tsammanin irin wannan saurin aiki ba, saurin cirewa ya fi Lshm daga 120y, kuma la'akari da nisa daga mashaya kuma a ko'ina. Itace ta bushe, hatsi yana da girma, da gaske ba a rufe (wannan mashaya kafin ƙarshen aikin kuma har yanzu suna iya yin aiki da aiki, kusan ba su doke ba).
Da kyau, na tattara komai a cikin wani yanki, garkuwa - muna tsaka wa firam daga tsarg.
Yayin da mazaunin gluits, na yi madauri na waje. Kuma a sa'an nan na fahimci cewa na yi sa'a, saboda ba mai tauri, wanda aka samo wanda aka samu ba shakka ba pine. Wane irin itace ban fahimta ba, amma launi ya bambanta, ana aiwatar da shi mai sauƙi, kodayake da fine na Pine.
Daga waɗannan sanduna, na yi firam na waje wanda ya "lullube" beads na wurin zama da firam. Bayan tsoma baki, akwai ƙananan bambance-bambancen a cikin girman, gyara guda sandpaper bayan a daidaita ƙarshen a gefe ɗaya.
Wurin zama tare da firam na ciki ya yi yashi a cikin jirgin sama. Nan da nan, zan juya kasan firam, to zai zama da wahala a same ta.
Da kuma glued zuwa gare ta waje.
Don haka, an cire ni daga tsarin samar da injin niƙa, biyu ya glued a cikin daban-daban yana ba ku damar maye gurbin "kwata" isa.
Yayin da wurin zama ke glued, sake maimaita kafafun magabata da kuma fara masana'anta.
Kowane kafa ya kunshi halves biyu, wanda a cikin manufar ya kamata ya haye a cikin tsagi. Za'a iya yin tsintsiyar da mai sawa da kuma chisel (ba na amfani da injin milling), amma a matakin "ƙira" na yanke shawarar yin kowane rabin rukuni.
Kawar da shoals na dipping a daidaita sasanninta.
Ina yin tsinkaye na gwaji.
Da tattara halves.
Rana ta biyu (4 hours) ya ƙare. Bar komai don manne.
A rana ta uku ke glubin da 'yan uwan ƙafafun da suke. A tsintsiyoyi sun zauna a hankali, bai ma bayar da kaya ba.
Tunda ban yi amfani da ducks (ba a cire shi daga tsarin masana'antu) ba, na yanke shawarar in haɗa kafaffun tare da tsallaka, Na yi tunani na dogon lokaci yadda za a yi hakan, da gaske ba na son in ci gaba da shan grooves. Haka kuma, na yi kuskure, na zagaye hakarkarin a kafafu, wanda ya kara matsaloli da alama. Amma idanu suna tsoro, da kuma hannaye suna yi.
Kuma abin da ya faru a ƙarshen (hoto bayan duk jiyya)
Da samun kafafu cikin tsarin wurin zama.
Rana ta uku (3 hours) an gama akan wannan. Bar komai ya bushe.
A rana ta huɗu, mafi yawan abin ya kwana.
Pruning inda kawai zaka iya magana m. Putty kananan gibba.
Wurin sararin samaniya (a cikin tashin hankali), ƙarin ƙarin karfafa kafaffun kafafu a maimakon abin da za a yiwa wurin zama, wanda zai guji kwance.
Daidaita a kwance a kwance, an matsar da ƙafafun (ba kaifi mai kaifi ba). Wani yanki na Flywood a matsayin indetent daga jirgin sama, alamomin kewayen da ke kewaye da kafafu.
Bayan haka, tsayin daka da tidious nika don daidaita gine-ginen taron, kurakurai lokacin da sawing, zagaye hakarkarin.
Kafin zanen:
Duba matattarar daga ƙasa shine saurin kafafu.
Bayan an shafi tare da varnish. (TSAPAP ne mai launi, mintuna 30 na bushewa).
Da kyau, abu mafi mahimmanci. Gwajin yana kusan a ciki. My nauyi ya wuce 75 kg. Na sanya matattara na kafafu biyu, na zauna a gefen kuma na zauna :) ba ya fadi, ba ya fadi, ba kasa da sau 1000, kamar yadda yake :)
Ranar ta huɗu da ƙarshe an kammala (3-4 hours tare da hutu don ci kuma jira bushewa bushewar varnish).
Don kyakkyawan kafa, ya zama dole a tuki mafi ƙarancin masu son hannu. Koyaya, ina fatan manne-shekara-501 da kuma ƙirar abin da aka makala.
Shi ke nan. Maganar masana'antu (a wannan yanayin, stools) ta amfani da knuckling ɗaya, na yi la'akari da nasarar wucewa. Hanyar kera tsarg - da tawada da grooves na kafafu Ina tsammanin yana da hakkin ya wanzu. Kuma idan kun ce kai tsaye game da kafafu, Na ji daɗin gaske, Ina shakka cewa da na yi irin wannan haɗin haɗin kai mai yawa.
Sannu masu shakka da kwayoyi. Akwai sha'awar - yi, kayan aiki na sakandare ne.
Godiya ga waɗanda suka yi zargin a gare ni, ayyukana na gaba don samar da kayan daki don bayar da wannan. Sabili da haka, zaku iya yin watsi da shi :) Har yanzu ba na yin tunani game da yadda ake yin tebur - mai kunnawa da masarufi da masarufi da gaske) Ba na shirin shiga cikin kayan, duk abin da kuka buƙata . Me zai dauki hannaye su yi wasu ƙananan kayan sana'a, don haka don yin magana da masu shirya ofis.
Tushe