Unexpected methods of applying painting tape during repair

Anonim

What distinguishes an experienced wizard from inexperienced? In fact, not only the level of ability to do some thing. The real guru of his case allocates the skill of using familiar things a very unexpected way in order to facilitate the employment process. An excellent example for such "folk" lifehakov can be the usual painting tape.

Unexpected methods of applying painting tape during repair

1. Tool handle

Unexpected methods of applying painting tape during repair

How to do on drills for a drill such labels so that they are not lost for a long time? Everything is very simple, take the painting tape and wrap the drill on it in the right place. This label will hold on to the end of the work. As for the convenience, it will not interfere with the tape.

2. Tag on the drill

Unexpected methods of applying painting tape during repair

The first thing you can (and even need!) To do, taking for any job, wrap the instruments handles with a painting ribbon. This will make them more comfortable and safe, especially if the tool is old or completely inexpensive. It will also protect the tool itself from pollution and the appearance of scratches.

3. Applying markings

Unexpected methods of applying painting tape during repair

If I do not want to draw a handle or pencil on the wall, before the drill drill goes into the wall, you can first stick a piece of painting tape at the place of work and make the appropriate marking-crop already on it. This method is ideal if you need to apply many labels on the wall that should be at the same level. The main thing is to work quickly and not leave the strips for a long time, and it will not stop tightly. Also, the surface of the tape will prevent an unnecessary sliding of the drill at the beginning of work.

4. Fixation of selflessness

Unexpected methods of applying painting tape during repair

If you need to screw the screws in a hard-to-reach place, then you can make such a fixative system. It is preparing for only 1-2 minutes. It begins the manufacture of the retainer from the skewering of the tape with a self-tape. After that, the tape is screwed to a screwdriver.

5. Place of collection

Unexpected methods of applying painting tape during repair

When you have to work with a large number of small parts or hardware, you can use a painting tape as a "collection place". A simple design of three pieces of ribbon on any surface will not allow anything important during the work.

Read more