The pattern is easy to read in the photo: This is an ordinary tyster (T-shirt), to which two tissue bands are sewn - transparent and stripe from the main tunic fabric. In order not to spend a lot of words, I don't know this detail in the MK, I don't know how to call it, I designated as a "tail." Briefly and understand, it seems to me :)
Materials and tools
- Actually, tishotka;
- 90 cm x / b Gorlevka;
- 15 cm of decorative tissue, on the texture similar to Tulle.
We extend the tishot to the tunic
First of all, placing the line on which the "tail" will fifty.
On the back of the line it is logical to carry out centimeters 5 below the bustball clasp; In front - at some angle to the side seam.
# The closer this line will pass to the side seam, the thicker will be the drapery of the "tail", there will be more folds on the side and wider the bottom of the tunic. The farther, respectively, the tunic will turn out at the bottom. You can even spend a line until the middle of the pass. In this case, the shape of the tunic will be close to the usual a-silhouette. #
Cut off.
Tunic is usually longer than a tashthka, so what remains from passing should be lengthened. We carry out the length of the resulting cut with a cloth, calculate how many lengths can be allowed to add. In this case, 70-55 = 15 cm.
For elongation, we use the backrest residue.
Cut the strip for elongation and sew the necklast with two lines. You can flash a double needle.
Align the side cuts, weeping the seams.
Making "Tail"
Crow "tail" on the specified sizes.
My tail is made double, both tissue are thin, and I did not want transparency.
We cross the tulle strip with a monophonic, clean the allowance, make a double snack. Then align the size of the upper part and the bottom one. We process the bottom and side sections of each of the details.
Since the fabric is thin enough, you can simply be adjusted to 5-7 mm and strain from above a wide zigzag. Excess the bending fabrics gently cut off the inside.
Execution of the corner. Additional thread helps to avoid "chewing" fabric at the beginning of sewing.
After the bottom and side sections are processed, overlapping the upper part of the "tail" to the bottom, we combine the bottom, align the top and clean the upper edge, stitching the details with each other. Place the line of combination.
By combining the centers of the "tail" and the backs, we rush the "tail" to what remains from the tashthka. We sew the seam of the brass double line.
We deepen the neck
From the residues of the backs of crumb places to handle the neck. I made a plaque single with an open cut. Baika Crow slightly shorter than the neck, stitching into the ring and, slightly stretching, we rush to the neck face with the front side. We stitched, turn off the plaque on the wrong one, carefully start the seam and make a double snack on the front side.
For the stop, I used my favorite paw with a guide (5). Exceptionally useful thing, I recommend! Significantly increases the chances to get a flat snack. :)
That's it! Tunic is ready.
PS: Rear view. The fold illustrates that it is better to take slippery fabric for the extension. Glevka clings for clothes, you have to wrap up.
