Most often incision is placed in the seam. This processing is easy to perform even a novice sewing amateur. But if the cut does not strengthen in a special way, then it quickly loses the appropriate appearance.
I will not insert photos with broken seams by cut in the skirt. It looks not aesthetic. Each of us came across this problem when socking the skirt of such a model and saw it out of pictures. A torn incision is difficult to repair. Therefore, it is better to strengthen it during sewing.
How to strengthen the cut in the seam
In order to strengthen the incision in the seam, the method that I intend to show, you need to observe a certain sequence of sewing. And this important step to make this important step to the seams on the seams.
For this you need Prepare a square From the main or lining fabric, if the skirt is sewn from a thick material.
For convenience Side Square There must be a little more than two points on the seams of the processed section.
Shared thread The square is better to arrange perpendicular to the seam.
Square It follows the middle to the beginning of the cut from the wrong side of the skirt when a thin or bulging fabric is folded. Or shifting 1 cm up from the cut when used for the leaving of the dense fabric or the main tissue of the skirt
And further, alternately, sew the lines detail to each of the seam points, perpendicular to the seam, at one level, so that the seams of the feeding come together in one place. This is the hardest.
Then, we fold the sewn square along the seam and cutting the excess width.
Now it remains to spend sections in a strict sequence.
First, the fixing section of the strip is made for both edges at thin or bulging fabric and for one with a dense.
After that, the allowances are made on the seams. As you can see in the photo below, the lateral sides of the strengthening strips will enter the mark.
This is not a difficult procedure, but the incision of the skirt will be reliably protected while the thing is worn.