The burnt fat on the lattice of the gas stove is an annoying reality, and to rub such a fat - unpleasant testing and ungrateful work. Without the use of special detergents, it is not easy to do it. Moreover, improper grid cleaning can cause damage. However, there are several quite effective "folk" techniques, which should be adopted by each mistress and the owner.
1. Cleaning with food soda
Cooking Cashitz from Soda.
Food soda or sodium bicarbonate is in each kitchen. Experienced hostesses know that due to its alkaline-based soda is an excellent cleaning agent. The fact is that it copes with the absolute majority of pollution. In order to clean the lattice, you should prepare a casoo composition of water and soda. The problem areas of the soda grille is applied for 1 hour.
After that, with the help of a rigid brush, primary cleaning is performed. Immediately behind it - secondary cleaning using a soft sponge. The cycle with the application of the composition, brush and sponge to repeat until the fat is completely cleaning.
2. Cleaning with hot water and ferry
You can not only send a lattice.
If there is no steam generator in the house, then you can soften the fat with the following method. In the first heaving the oven. We put in it a baking sheet with a solution of soap. After that, put the lattice of the plate on the baking sheet so that it is completely left for water, after which we excite it for a while.
After such a procedure, the oven will need to be washed from soap and fat.
Important : Remember about caution when working with oven, ferry and boiling water!
3. Cleaning calcination
The most important thing is not too hurry.
Attention : This method is suitable only for cast iron lattices.
One of the most simple methods whose idea is to simply burn all the fat sticking to the lattice using a soldering lamp. If desired, the same can be done and just bringing the grid to the burner. With uniform calcination, fat will burn throughout the grid. After completing the procedure, the lattice should be wiped with a cloth or sponge.
Important : When working with fire, remember the safety technique, as well as that the grille cannot be kept hands.
4. Ammonia cleaning
We put into the package, fill alcohol.
Naming alcohol is sold in any pharmacy. Not everyone knows that this is a 10 percent solution of ammonia. Nevertheless, experienced hostesses are usually aware of the wonderful properties of ammonia in writing purity.
For cleaning, we take our grille from the plate, put in a bag and pour a bubble of ammonic alcohol there. Tie a bag and leave lying overnight. In the morning I remove the lattice and my usual cleaning agent.
Remember that ammonia has a very unpleasant sharp smell, and therefore it is necessary to ensure good air ventilation
5. Cleaning with mustard powder
Nevertheless, an effective way.
One of the most extraordinary methods. With all this, the purification of fat mustard powder is extremely effective. The work process is reminiscent of the already described with soda. First you need to cook "Cashitz" from the water and mustard. After that, the lattice is wetted with water and is cooked with the prepared composition. After that, it remains to wait 2-3 hours and wash the grille with the cleaning agent.
6. Cleaning vinegar
Vinegar will help.
Any acid greatly dissolves organic compounds, including fat. We are also interested in exclusively table vinegar. All you need to do soak the lattice in vinegar in a suitable container. A few hours later, it will be enough to wash the grille with a sponge.