For the manufacture of baskets, you will need:
- cardboard
- paper
- PVA glue and moment
- Malyan Scotch
- Morilka
- primer
- varnish
- Self-tech
To begin with, cut out from the cardboard the basis for the frame of the desired size. If necessary, glue the desired number of layers.
Connect the details with each other. At this stage, we use glue, greasy tape and square.
When the frame is almost ready, we carry out additional measurements. If necessary, make fit.
Additionally, fix the frame with the help of a painting tape.
Cut the paper, twist the tubes, paint them with a mourn with the addition of primer. Abundant coating the tube with a solution consisting of hot water and varnish in equal proportions. They dry the tube with a hairdryer so that they become dry from above, and they remain slightly wet inside.
Having made the appropriate measurements, we define the location of the racks. Items from the racks consists of a pair of tubes. To ensure a beautiful weaving, only one of the tubes of each rack is glued to the frame at once. For better fixation from above, we glue the cardboard strip.
Go to the formation of corners. For their salary tube cut and bend.
When making angles, we pave the tubes alternately along and across.
Go to the bracket frame. Folded base take into account the location of the racks.
Ideally, the extensions of the tubes do so that the place of the junctions were from the inside.
When the frame is braided completely go directly to the weaving basket. Fix 2 tubes for neighboring racks and begin the "scente" weaving. When passing through the angles, it is necessary to make a "vine", taking into account the pattern. If the tube comes out, the angle is simply enveloped, and then the tube starts behind the rack.
If inside, then it is necessary to make a turn around the corner rack, and then remove the tube outside.
After 3 rows passed, we supplement the rack with the missing tubes, fixing them at the base.
We continue the "Sitzen" weaving to the set of the desired height.
For the formation of the handles, we change the direction of weaving using 2 tubes at the same time.
Having reached the top short.
We distribute the poles of the racks so that the part of them was outside, and the part came insight. I rebuild the edges of the tubes, we deposit an extra layer of cardboard.
Go to the braid of the top of the basket.
We form a donyshko, they take it with self-keys, insert from the base side and fix it. In essence, work on creating a basket is completed.
How many baskets have each in the farm solves independently.
More detailed about the nuances of the video below: