The outlet, falling out of the wall - a popular problem that can be seen in every third apartment. Many simply ignore this problem, especially if the buzzing socket is not regularly used. Such an approach is rooted in the root is wrong. Therefore, it is important to understand why this is at all happening, and also to know what to do so that the grief-socket never falls out.
Why the socket falls
I do not need to ignore.
The reasons for the outlet falling in the house can be several. First - This is the absence or malfunction of the opposite. It is this detail that provides the most reliable fastening of electronics. Second - These are large mechanical loads on the outlet, the consequence of which the damage of the entire fastening socket was. Very often, the sockets are pulled by too heavy extension cords, adapters and network splitters. Third reason - This is the overall harness of the design, originally poor installation or wear of the structure.
Is it possible to ignore the problem
It is worth repairing early.
If the socket dropped out of the wall is not used, then with a sufficiently large probability, nothing terrible will happen. Of course, all this strongly depends on the specific case, as well as on the degree of damage to the wiring. It is not less, a saving socket is a source of danger for both children and adults. If someone shoves the fingers into the mounting cavity, then it can be powder. In addition, small children or animals can pull out the rosette even stronger, which in turn will lead to extremely sad consequences. Therefore, the best solution will not postpone the repair.
How to fix breakdown
Replace a cup.
Before you take care of the repair of the drop-down outlet, it is strongly recommended to remember that it will have to work with electrical equipment. For this reason, the optimal solution will be the challenge to the house of a qualified specialist - an electrician who will make all the work. In the absence of proper skills, do not even attempt to repair yourself.
Click as it should.
Before producing any manipulations with a power outlet and power grid, you need to stop the flow of current to the repaired area. You can do it on the distribution panel of your home or apartment. After turning off the light, you should also check with a lamp or special tool actual absence of electricity.
The main thing is to sit tightly.
Next, you need to remove the outlet from the cavity and check the condition of the fastening petals. If the situation and their condition allows, the elements of the structure can be simply tightened with the help of the passage. Also, the location of the stop is recommended to put dense gum to tighten the entire design.
But it is better to call a specialist.
If the peavern is in a very poor condition, then it should be made full replacement. A new item can be found in any economic store, in the appropriate department. It is best to choose modern conversion with ribbed walls that are fixed at least two dowels with a diameter of 6 mm.