Belt-Obi from Denim and Suede will make a highlight to the country image and besides the waist visually thinner.
You will need:
- artificial suede;
- denim;
- threads for sewing;
- Threads for sewing denim fabrics;
- glue for textiles;
- line for patchwork;
- chalk pencil;
- tape measure;
- Portnovsky pins;
- scissors;
- Device for the manufacture of oblique bay width 18 mm;
- large-scale ruler;
- clips for fabric
STEP 1
Rizens (item 3) pinch to the side parts of the belt (part 2) front side to the front side and damage 1 cm at a distance.
Punches of seams are iround.
Step 2.
Details 2 Plotting to details 1 front side to the front side and damage at a distance of 1 cm, leaving on the right side open areas between the transverse labels for the rubbers (attention: symmetrically!).
Step 3.
Punches of the seams are iripped, the allowances on the edges of the slosses are found on the wrong side.
Outdoor and inner belt to be folded with involving sides and leaf.
Power on the edges of the cut area are manually sewn.
Step 4.
From the artificial suede, carve a seasal disposal of 36 mm wide (if necessary to carve out the oblique).
Baiks stretch through the device for making becks and root.
Step 5.
For better fixation, the inner and exterior belt stack around the perimeter to the edge of the invalid storage to the wrong side.
Each long edge belt is bayed.
Beyching is to be filled with a large zigzag, while the allowance of the inner edge of the faucet can be flattened, then the thickness of the layers will become less and the scribble will be easier.
Step 6.
The allowance of the inner edge of the faucet neatly cut down close to the line.
Step 7.
Observe the transverse ends of the strings: at first, the places glue, so that it does not move on the corners, then bother with a large zigzag, as described in steps 5 and 6.