Author of this work
In the manufacture of one of the puppet, I ran into a problem: what to plant it? Several days wandered through the spaces of the Internet, but did not find anything suitable. I had to invent your own way of making a chairs from what was at hand.
We will need:
- cardboard
- Thin paper (newspaper or journal)
- tube - balloon wand
- 4 tree self-proof
- PVA glue
- Glue moment crystal
- Piece of fabric 10x10 cm
- twisted cord
- braid or sticker for scrapbooking
- Stationery or Macate knife
- Metal ruler
- acrylic paints
First you need to decide on the size. Personally, I did not draw any sharp, just took a doll and began to plant it on all the boxes and boxes in the house. Experimed by determined that the chair I need a 7.5 cm high and the seat 9x9 cm.
From a thin cardboard (sold in stationery stores), 10 squares of 10x10 cm in size, glued them with PVA and sent under the press to complete drying.
While the workpiece for the seating dries - it took up legs. He took the tube - a wand for balloons and cut off four pieces of 7 cm.
With the help of a dump knife and a metal line cut a strip of paper. I think that paper can be taken any, but I used the advertising log.
The strips lubricate the PVA glue and wind plastic tubes, trying to give the legs of the same shape. Also leave until complete drying.
It is best to postpone further work until the next day. The workpiece for the seating was dried, and I cut the surplus with a slicing knife according to a ruler. It turned out a very durable square with perfectly smooth edges.
Now I took the workpiece of the legs and carefully erased all the irregularities of the smallest sandpaper. On the seat, placing the place of attachment of the legs and screw the screws.
From the bottom on the self-tapping screws I put on the legs, gluing them at the time of the crystal.
Bashed Bednate with black or brown acrylic paint. I paint on top of gold paint.
The imitation of a wood thread can be made in different ways. You can use stickers ...
And you can glue the appropriate braid and squeak it into the color of your chair.
She took a piece of cardboard for a couple of millimeters less than the finished seating. On it cut the square from the synthet board. Sliced a cloth with a scab with a bend and covered the cardboard with a synthet board. Stretched with thread.
Blucked the crystal with glue chair. On the edge covered the bog between the cloth and the cardboard with the help of a cord.
On this technology, you can make other chairs. It all depends on your imagination!
It turns out very light and durable furniture. The banquette withstood a two-liter jar filled with water (something heavier was heard, although I believe that this is not the limit).
A source