We will tell how to handle the aerosol, but the aerosol will not be simple, we will make a mirror coating on the glass. For the experiment, we took a cheap frame with a glass and bought a stencil with beautiful cutouts, the aerosol glue and the "Mirror" spray will still need.
If you draw on the glass, then definitely wipe it with alcohol containing to degrease.
The second mandatory preparatory step in our work with glass is to apply glue to the trappers turnover. Try to close everything around everything around, as the glue is very scattered on the parties.
We apply stencil to the glass and be sure to press it well. It can be done by hand, and it is possible and a roller for a customer of wallpaper. Roller will provide you with the perfect fit of the stencil.
We take for the spray "Mirror", before applying it you need to shake a couple of minutes, it is written in the instructions! We begin to spray with a sufficient distance. An important rule: before starting to spray on the stencil, you need to sprinkle on a sheet of paper. In this way, you will see the power of the jet and determine the most sufficient distance, the mirror aerosol jet is weak and small particles, so it can be applied almost to the emphasis.
We look closer if the layer seems to you too thin, then continue to spray an aerosol. I want to warn you right away, the mirror aerosol is a real gas attack, it becomes simply impossible to breathe. Do this work in the respector or in a well-ventilated room.
After you sprayed enough spray, you can remove the stencil and watch what happened.
Your drawing will look perfectly smooth, but the "Mirror" aerosol may not be enough and the coating will look like sex transparent, not trouble, they are reusable, and it can be glued again to the same place and continue spraying an aerosol. If your mirroring looks as you assumed, proceed to the next stroke, paint the frame. To do this, we take a silver varnish, before applying decorative varnishes you need to shabby well. A piece of ordinary sponge is applied to the frame, unlike paint, the varnish varnish when applied to one layer, the color of the frame shines through the varnish and the silver tree is obtained to achieve less transparency simply apply several layers.
When the frame is ready to remain only to collect the picture.
Gently put the glass into the frame with a mirror layer in the inside, the mirror aerosol gives not a resistant coating that can be easily scratched or washed.
Therefore, it must be protected, or as we have in the photo, cardboard, or varnish if it is for example the door of the chest. For contrast, I pre-painted in black.
The mirror layer applied with an aerosol imitates the old mirror, do not expect from its effect of industrial mirrors, all the same, the technology is easier. It is possible to look at it, but not as in the usual mirror. However, as a decorative effect, this mirror coating looks very cool.
A source