1. A tool made from undergraduate materials for wood thread.
2. As a blade for the future cutting tool, remnants of high-quality instrumental steel can be used. For example: Worn canvases of mechanical saws for metal, broken milling milling metal, worn dangerous razor blades, unused canvas for cutting spikes on wood products, cutters for knives, broken cloths of laminated hacksaws, etc.
3. For example, you need to make a knife (knife-jamb).
4. The handle makes two wooden dugs (birch, pine, linden, beech, etc.). It does not matter which breed will be used for the manufacture of the handle, but the soft breed is easier processing. Billets make the following dimensions: 120 x 30 x 7 mm
5. As a blade we use a spare cutter for a knife (retractable). If there is no, use any of the items listed earlier.
6. Cutting disk or with an electrical billet, give the necessary shape and sizes. During operation, the metal must be periodically wetted with water so that the blank does not overheat. Those areas that have shown should be removed as they did not harm.
7. On one billet, the handle mark the place where the blade shank will be located.
8. With the help of a sharp knife in a wooden billet, they make a deepening so that the shank in it is tight.
9. The shank needs to be treated with emery paper and degrease, then the surface is molded with PVA glue and squeeze the set in the vice. In the absence of vice, the coil clamp of the meat grinder is used.
10. The workpiece must be withstanding the day at room temperature, after which the excess wood is removed. To do this, it is more convenient to use a circular, and in its absence can be trimmed with a knife.
11. Apply a knife-jamb with a knife and grinding skurt. The handle is covered with mourn and varnish. In other matters, it can not be processed.
12. The finished tool is sharpened to the sharpness of the razor. Other cutting tools are manufactured by similar technology, for example, a knife for planing using a cloth of a laminated hacksaw.
Shared MK - Sergey.
A source