Summer time - resting time on the shore of the reservoir. And the beach, as is known the place where the "Treasures" burdens. So why not take advantage of glass fragments that have been treated with water and pebbles. I present to your attention an article about how To do Naughty Hands Original wire pendant and sea gifts.
Step 1: Materials
- Skills found on the coast or reservoir.
- Small wire roll.
- For a start, there are enough buns and pairs of scissors. However, to improve the quality of the performed DIY I recommend using pliers, pliers with rubber linings and round-rolls. As a rope was used 1.5 mm black cotton thread impregnated with wax.
Step 2: We accept the decision
After preliminary training, you should decide on the appearance Selfieckers.
Thus, after you decide how you wrap the "treasure" and whether you will use, you need to determine the length. For this work, a wire was used with a length of 36 cm. I recommend to take a length with a margin.
Step 3: Loop
With the help of pliers, you can make a lot of loops of various sizes. However, the pencil works no worse!
Take the wire and wrap it twice around the pencil. Behind that "mustache" are on the same line, and then twist them one or twice.
Step 4: Begin to form
Wrap one "mustache" around the back of the subject. We divide the "mustache" into two directions, one will follow the "back", and the second one. See photo.
Step 5: Packaging
Wrapped the windows according to the photo.
Step 6: Completion
Let us miss both wires back into the loop and wrap them several times. Cut the remnants to such a length so that the ends wrap in the back of the loop.
Next, refuel the wire using pliers for this.
Step 7: Tighten and Correct
The last thing you need to do is tighten the wire to make sure that it will hold the glass in place for a long time. To do this, I recommend using the round bugs, because other types of tools can damage the wire.
Step 8: Other examples
Step 9: Cut Mount
I hope that it was easy to repeat all the actions of the photos. Now shifted the cord through the loop and make an adjustable node.
Step 10: Other pendants
A source