Greater both sons began to crawl around the house, periodically in different directions. It took a playpen. The spouse sent me an offer to buy ready. Seeing the size and price I was "surprised" and expressed my indignation of obscene phrases. It was decided to make Manege himself and from the tree and lacquer did not cover, so that the boys were gnawed)))
Measuring the rooms in which it presumably might be able to calculate the desired size 174x154cm (at the rate of bar 40x40)
Having measured the head of the son's head to the conclusion that the distance between the chopsticks will be 100mm. )))
He will stop at height in 50 cm.
Material:
Bar 40x40x250cm (no more short time) ... 8pcs
Cuttings to mop with a diameter of 25mm (120cm seems) ... 32pcs
Everyone picked up as much as possible: even, without bitch, without cracks.
Important Nuans! (In the comments, one good person recalled)
First you need to buy cuttings from the "one party", and measure their diameter. Since they can not make 25 diameters, but some other from 25 to 23.5 (approximately). As I understand it is connected directly with the production itself. Some manufacturers do not wait for wood drying and make from raw, thanks to which the tree is dry and usually "leads."
Therefore, pushing out from the resulting diameter we buy the drill of the desired diameter.
Protective facilities:
Glasses really need
Poleizer, if possible.
Headphones, at will
Instruments:
Pencil
Roulette
Corner-line
Clamps, couple
Shoe, good
Drill
Tree drill with a diameter of 25mm, good
Grinder with large and medium skins
Schurd middle and small (sandpaper)
Mill, with a radius cutter (I forgot about it (()
Wood cutter, it is not necessary that will not be superfluous
Part of the tools took from friends)
I liked such a roll, but the price is under a thousand (
With this small smooth tooth
Process:
First goes the most tedious, place. Determine what, where, bypassing the knots and choose the most even plots.
He took the drill 25 drill and a shovel, and began to drill and saw. It is advisable to drill perpendicularly). 120 Tallest drill with a depth of 20mm, 12 extreme holes through, and four extremely 10mm depth (about them more below).
Already felt when I ended with the drilling and sawing.
The next "day" continued with grinding.
First, a large skirt, which would remove the main irregularities. Here, the main thing is not to overdo it, to not change the geometry of the bar (not to fill up side) at the same time made the radius. It was here that I had forgotten to take the mill (
Clamps are very comfortable, some kind of China
It walked through the middle side of the grinder and after manually medium.
After walked in shallow and rewarded the bars home to the subsequent polishing. Whatever the street from humidity did not swell.
This is the lowest bar, decided not to drill through. The depth of the opening is 10mm. By the way, the label is lower, facilitated the assembly
And took up the cut of the cuttings. Paved on sticks 60pcs 44cm and 4pcs in 49cm. They were easier to swee, but the number ...
Skubril and went polishing all together.
For those who do not know how to polish the tree there are two ways:
1) polish (rubbed) a piece of such a tree on the treated
2) rubbed a bunker tissue, the reverse side of the skins
I polished the reverse (tissue) side of the skins, we have called anything.
Pulled out the vacuum cleaner and spent all the holes before assembly.
The photo of the assembly itself is not. I flew out of my head, and I wanted to gather quickly (the boys could wake up at any time)
The photo shows how the polishing turned out.
And here's the finished result)
The angular sticks on the idea fasten the walls and in the case of the parsing is convenient.
So far, neither glue, nor on the self-tapping screw.
The spouse is pleased, I did not expect that it turns out so well)
Kids are satisfied)
I, too)
And now about "shoals".
1) I forgot to calculate the angular sticks, I had to go buy another two cuttings.
2) the shove at the beginning took from the garage, it turned out to be a bad (long-bought Dieta) saw crooked, went for the second time in the construction store and bought a good one.
3) and the most severe. The drill which lay in the garage was not 25mm, but 23.8mm (someone was pursued). Naturally, I was not going to replete all holes. Fortunately, there is access to the lathe, swallowed sticks)
Such chips made drill on several holes, see a stupid. Until now, I am surprised by such a miss on my part.
Take a good tool, from part because of it it turns out bad
The material cost 2500r
I hope to someone this article will come in handy, the spouse barely suffered until I wrote everything)))
a source